From: Lee Jones <lee@kernel.org>
To: Jun Yan <jerrysteve1101@gmail.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-leds@vger.kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, luccafachinetti@gmail.com,
pzalewski@thegoodpenguin.co.uk, daniel@zonque.org
Subject: Re: [PATCH v7 6/6] leds: is31fl32xx: Move pwm frequency setting to init_regs()
Date: Wed, 27 May 2026 16:19:29 +0100 [thread overview]
Message-ID: <20260527151929.GB712405@google.com> (raw)
In-Reply-To: <20260520135659.1430008-7-jerrysteve1101@gmail.com>
On Wed, 20 May 2026, Jun Yan wrote:
> commit a18983b95a61 ("leds: is31f132xx: Add support for is31fl3293")
> swapped the order of is31fl32xx_parse_dt() and is31fl32xx_init_regs().
>
> This causes the PWM frequency configuration programmed in
> is31fl32xx_parse_dt() to be overwritten by the register reset
> operation performed in is31fl32xx_init_regs().
>
> Move the PWM frequency setting logic from is31fl32xx_parse_dt() to
> is31fl32xx_init_regs() and separates device tree parsing from hardware
> initialization.
>
> Fixes: a18983b95a61 ("leds: is31f132xx: Add support for is31fl3293")
> Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
> ---
> drivers/leds/leds-is31fl32xx.c | 22 ++++++++++------------
> 1 file changed, 10 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
> index 2d7ff4c5a08c..c545a3b7a05a 100644
> --- a/drivers/leds/leds-is31fl32xx.c
> +++ b/drivers/leds/leds-is31fl32xx.c
> @@ -63,6 +63,7 @@ struct is31fl32xx_priv {
> struct i2c_client *client;
> struct gpio_desc *powerdown_gpio;
> unsigned int num_leds;
> + bool pwm_22khz;
> struct is31fl32xx_led_data leds[];
> };
>
> @@ -346,6 +347,14 @@ static int is31fl32xx_init_regs(struct is31fl32xx_priv *priv)
> if (ret)
> return ret;
>
> + if ((cdef->output_frequency_setting_reg != IS31FL32XX_REG_NONE) &&
> + priv->pwm_22khz) {
Nit: No need to wrap here. Use up to 100-chars to beautify.
> + ret = is31fl32xx_write(priv, cdef->output_frequency_setting_reg,
> + IS31FL32XX_PWM_FREQUENCY_22KHZ);
Nit: Line-up with the '('.
> + if (ret)
> + return ret;
> + }
> +
> /*
> * Set enable bit for all channels.
> * We will control state with PWM registers alone.
> @@ -420,7 +429,6 @@ static struct is31fl32xx_led_data *is31fl32xx_find_led_data(
> static int is31fl32xx_parse_dt(struct device *dev,
> struct is31fl32xx_priv *priv)
> {
> - const struct is31fl32xx_chipdef *cdef = priv->cdef;
> int ret = 0;
>
> /* Driving this GPIO line low takes the chip out of shutdown,
> @@ -431,17 +439,7 @@ static int is31fl32xx_parse_dt(struct device *dev,
> return dev_err_probe(dev, PTR_ERR(priv->powerdown_gpio),
> "Failed to get powerdown gpio\n");
>
> - if ((cdef->output_frequency_setting_reg != IS31FL32XX_REG_NONE) &&
> - of_property_read_bool(dev_of_node(dev), "issi,22khz-pwm")) {
> -
> - ret = is31fl32xx_write(priv, cdef->output_frequency_setting_reg,
> - IS31FL32XX_PWM_FREQUENCY_22KHZ);
> -
> - if (ret) {
> - dev_err(dev, "Failed to write output PWM frequency register\n");
> - return ret;
> - }
> - }
> + priv->pwm_22khz = of_property_read_bool(dev_of_node(dev), "issi,22khz-pwm");
>
> for_each_available_child_of_node_scoped(dev_of_node(dev), child) {
> struct led_init_data init_data = {};
> --
> 2.54.0
>
>
--
Lee Jones
prev parent reply other threads:[~2026-05-27 15:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-20 13:56 [PATCH v7 0/6] leds: Add powerdown gpio for is31fl32xx Jun Yan
2026-05-20 13:56 ` [PATCH v7 1/6] dt-bindings: leds: issi,is31fl32xx: convert the binding to yaml Jun Yan
2026-05-21 7:46 ` Krzysztof Kozlowski
2026-05-20 13:56 ` [PATCH v7 2/6] dt-bindings: leds: issi,is31fl32xx: add support for is31fl3236a Jun Yan
2026-05-20 13:56 ` [PATCH v7 3/6] dt-bindings: leds: issi,is31fl32xx: Add powerdown-gpios property Jun Yan
2026-05-20 13:56 ` [PATCH v7 4/6] leds: is31fl32xx: Add powerdown pin for hardware shutdown mode Jun Yan
2026-05-27 15:17 ` Lee Jones
2026-05-20 13:56 ` [PATCH v7 5/6] leds: is31fl32xx: Fix missing brightness_steps for is31fl3236 Jun Yan
2026-05-20 13:56 ` [PATCH v7 6/6] leds: is31fl32xx: Move pwm frequency setting to init_regs() Jun Yan
2026-05-27 15:19 ` Lee Jones [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260527151929.GB712405@google.com \
--to=lee@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel@zonque.org \
--cc=devicetree@vger.kernel.org \
--cc=jerrysteve1101@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=luccafachinetti@gmail.com \
--cc=pzalewski@thegoodpenguin.co.uk \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox