From: Udaya Kiran Challa <challauday369@gmail.com>
To: lee@kernel.org, pavel@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org
Cc: skhan@linuxfoundation.org, me@brighamcampbell.com,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Udaya Kiran Challa <challauday369@gmail.com>
Subject: [PATCH] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema
Date: Thu, 20 Aug 2026 20:32:23 +0530 [thread overview]
Message-ID: <20260820150223.108374-1-challauday369@gmail.com> (raw)
Convert lacie,netxbig-leds devicetree binding from legacy
text format to DT schema.
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
---
.../bindings/leds/lacie,netxbig-leds.yaml | 134 ++++++++++++++++++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ------------
2 files changed, 134 insertions(+), 92 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
diff --git a/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
new file mode 100644
index 000000000000..ffdd47458d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/lacie,netxbig-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LaCie/Seagate netxbig CPLD LEDs
+
+maintainers:
+ - Simon Guinot <simon.guinot@sequanux.org>
+
+description: |
+ Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+ boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+properties:
+ compatible:
+ const: lacie,netxbig-leds
+
+ gpio-ext:
+ description: Phandle for the gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ timers:
+ description: |
+ Timer array. Each timer entry is represented by three integers:
+ Mode (gpio-ext bus), delay_on and delay_off.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+ - compatible
+ - gpio-ext
+
+additionalProperties:
+ description: Each child node represents a single LED
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ mode-addr:
+ description: Mode register address on gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ mode-val:
+ description: |
+ Mode to value mapping. Each entry is represented by two integers: a mode and
+ the corresponding value on the gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ bright-addr:
+ description: Brightness register address on gpio-ext bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ max-brightness:
+ description: Maximum brightness value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - mode-addr
+ - mode-val
+ - bright-addr
+ - max-brightness
+
+examples:
+ - |
+ #include <dt-bindings/leds/leds-netxbig.h>
+
+ netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = <&netxbig_gpio_ext>;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ max-brightness = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ max-brightness = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
deleted file mode 100644
index 5ef92a26d768..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-netxbig.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
-boards (Example: 2Big/5Big Network v2, 2Big NAS).
-
-Required properties:
-- compatible: "lacie,netxbig-leds".
-- gpio-ext: Phandle for the gpio-ext bus.
-
-Optional properties:
-- timers: Timer array. Each timer entry is represented by three integers:
- Mode (gpio-ext bus), delay_on and delay_off.
-
-Each LED is represented as a sub-node of the netxbig-leds device.
-
-Required sub-node properties:
-- mode-addr: Mode register address on gpio-ext bus.
-- mode-val: Mode to value mapping. Each entry is represented by two integers:
- A mode and the corresponding value on the gpio-ext bus.
-- bright-addr: Brightness register address on gpio-ext bus.
-- max-brightness: Maximum brightness value.
-
-Optional sub-node properties:
-- label: Name for this LED. If omitted, the label is taken from the node name.
-- linux,default-trigger: Trigger assigned to the LED.
-
-Example:
-
-netxbig-leds {
- compatible = "lacie,netxbig-leds";
-
- gpio-ext = &gpio_ext;
-
- timers = <NETXBIG_LED_TIMER1 500 500
- NETXBIG_LED_TIMER2 500 1000>;
-
- blue-power {
- label = "netxbig:blue:power";
- mode-addr = <0>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 1
- NETXBIG_LED_TIMER1 3
- NETXBIG_LED_TIMER2 7>;
- bright-addr = <1>;
- max-brightness = <7>;
- };
- red-power {
- label = "netxbig:red:power";
- mode-addr = <0>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <1>;
- max-brightness = <7>;
- };
- blue-sata0 {
- label = "netxbig:blue:sata0";
- mode-addr = <3>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 7
- NETXBIG_LED_SATA 1
- NETXBIG_LED_TIMER1 3>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- red-sata0 {
- label = "netxbig:red:sata0";
- mode-addr = <3>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- blue-sata1 {
- label = "netxbig:blue:sata1";
- mode-addr = <4>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 7
- NETXBIG_LED_SATA 1
- NETXBIG_LED_TIMER1 3>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- red-sata1 {
- label = "netxbig:red:sata1";
- mode-addr = <4>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
-};
--
2.34.1
next reply other threads:[~2026-08-20 15:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 15:02 Udaya Kiran Challa [this message]
2026-08-20 15:11 ` [PATCH] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema sashiko-bot
2026-08-20 18:06 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260820150223.108374-1-challauday369@gmail.com \
--to=challauday369@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=me@brighamcampbell.com \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox