Linux LED subsystem development
 help / color / mirror / Atom feed
From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: Vadim Pasternak <vadimp@mellanox.com>,
	rpurdie@rpsys.net, linux-leds@vger.kernel.org, jiri@resnulli.us
Subject: Re: [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
Date: Sat, 17 Feb 2018 22:55:00 +0100	[thread overview]
Message-ID: <45298ab7-9558-3df4-57e7-c3c198a805b8@gmail.com> (raw)
In-Reply-To: <20180216222558.GA5265@amd>

On 02/16/2018 11:25 PM, Pavel Machek wrote:
> Hi!
> 
>>> +++ b/drivers/leds/leds-mlxreg.c
>>> @@ -0,0 +1,309 @@
>>> +/*
>>> + * Copyright (c) 2018 Mellanox Technologies. All rights reserved.
>>> + * Copyright (c) 2018 Vadim Pasternak <vadimp@mellanox.com>
>>> + *
>>> + * Redistribution and use in source and binary forms, with or without
>>> + * modification, are permitted provided that the following conditions are met:
>>> + *
>>> + * 1. Redistributions of source code must retain the above copyright
>>> + *    notice, this list of conditions and the following disclaimer.
>>> + * 2. Redistributions in binary form must reproduce the above copyright
>>> + *    notice, this list of conditions and the following disclaimer in the
>>> + *    documentation and/or other materials provided with the distribution.
>>> + * 3. Neither the names of the copyright holders nor the names of its
>>> + *    contributors may be used to endorse or promote products derived from
>>> + *    this software without specific prior written permission.
>>> + *
>>> + * Alternatively, this software may be distributed under the terms of the
>>> + * GNU General Public License ("GPL") version 2 as published by the Free
>>> + * Software Foundation.
>>> + *
>>> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
>>> + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
>>> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
>>> + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
>>> + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
>>> + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
>>> + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
>>> + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
>>> + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
>>> + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
>>> + * POSSIBILITY OF SUCH DAMAGE.
>>> + */
> 
> You may want to switch on to spdx next time you update the driver...
> 										Pavel
> 										
> 

Right, so I propose the following modification:

diff --git a/drivers/leds/leds-mlxreg.c b/drivers/leds/leds-mlxreg.c
index cc9f297..56d6f30 100644
--- a/drivers/leds/leds-mlxreg.c
+++ b/drivers/leds/leds-mlxreg.c
@@ -1,35 +1,7 @@
-/*
- * Copyright (c) 2018 Mellanox Technologies. All rights reserved.
- * Copyright (c) 2018 Vadim Pasternak <vadimp@mellanox.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// Copyright (c) 2018 Mellanox Technologies. All rights reserved.
+// Copyright (c) 2018 Vadim Pasternak <vadimp@mellanox.com>



If everyone agrees I can fix the original commit in the linux-leds.git
by myself.

-- 
Best regards,
Jacek Anaszewski

  reply	other threads:[~2018-02-17 21:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-15 23:37 [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform Vadim Pasternak
2018-02-16 20:26 ` Jacek Anaszewski
2018-02-16 22:25   ` Pavel Machek
2018-02-17 21:55     ` Jacek Anaszewski [this message]
2018-02-18  5:48       ` Vadim Pasternak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=45298ab7-9558-3df4-57e7-c3c198a805b8@gmail.com \
    --to=jacek.anaszewski@gmail.com \
    --cc=jiri@resnulli.us \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=rpurdie@rpsys.net \
    --cc=vadimp@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox