Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

[Luca Weiss <luca@z3ntu.xyz>]

On Freitag, 14. April 2023 01:36:38 CEST Konrad Dybcio wrote:
> On 14.04.2023 01:17, Luca Weiss wrote:
> > The phone features a notification LED connected to the pmi632. Configure
> > the RGB led found on it.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> > 
> >  arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 29
> >  +++++++++++++++++++++++ 1 file changed, 29 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> > b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index
> > 70e683b7e4fc..301eca9a4f31 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> > +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> > @@ -4,8 +4,10 @@
> > 
> >   */
> >  
> >  /dts-v1/;
> > 
> > +#include <dt-bindings/leds/common.h>
> > 
> >  #include "sdm632.dtsi"
> >  #include "pm8953.dtsi"
> > 
> > +#include "pmi632.dtsi"
> > 
> >  / {
> >  
> >  	model = "Fairphone 3";
> > 
> > @@ -83,6 +85,33 @@ &pm8953_resin {
> > 
> >  	linux,code = <KEY_VOLUMEDOWN>;
> >  
> >  };
> > 
> > +&pmi632_lpg {
> 
> qcom,power-source?

This property is only used if triled_has_src_sel is set in the driver (which 
it isn't on pmi632), only on pm8941 & pmi8994 it is set.

Regards
Luca

> 
> Konrad
> 
> > +	status = "okay";
> > +
> > +	multi-led {
> > +		color = <LED_COLOR_ID_RGB>;
> > +		function = LED_FUNCTION_STATUS;
> > +
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		led@1 {
> > +			reg = <1>;
> > +			color = <LED_COLOR_ID_RED>;
> > +		};
> > +
> > +		led@2 {
> > +			reg = <2>;
> > +			color = <LED_COLOR_ID_GREEN>;
> > +		};
> > +
> > +		led@3 {
> > +			reg = <3>;
> > +			color = <LED_COLOR_ID_BLUE>;
> > +		};
> > +	};
> > +};
> > +
> > 
> >  &sdhc_1 {
> >  
> >  	status = "okay";
> >  	vmmc-supply = <&pm8953_l8>;