Re: [PATCH v2 3/4] leds: core: add documentation for color extension

[Jacek Anaszewski <j.anaszewski@samsung.com>]

On 02/16/2016 08:29 PM, Heiner Kallweit wrote:
> Document the color extension in Documentation/leds/led-class.txt
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> v2:
> - introduced to patch series
> ---
>   Documentation/leds/leds-class.txt | 19 ++++++++++++++-----
>   1 file changed, 14 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
> index d406d98..fbd9062 100644
> --- a/Documentation/leds/leds-class.txt
> +++ b/Documentation/leds/leds-class.txt
> @@ -8,6 +8,14 @@ LED is defined in max_brightness file. The brightness file will set the brightne
>   of the LED (taking a value 0-max_brightness). Most LEDs don't have hardware
>   brightness support so will just be turned on for non-zero brightness settings.
>
> +If a driver uses the colour extension of the LED core then the brightness
> +file can be used to set hue / saturation / value. The brightness value is
> +interpreted as: <0000000F><HHHHHHHH><SSSSSSSS><VVVVVVVV>
> +Usage of the least byte is identical to monochrome mode. Saturation can be
> +0-255 and hue 0-251 (Colour circle is mapped to 0-252).
> +If hue and saturation both are 0 the current colour is not changed and only
> +the brightness is set. This can be overridden with flag F (LED_SET_HSV).

Here similarly as in the commit message of 1/4 - more information on why
LED_SET_HSV is needed. btw - I liked LED_SET_COLOR more.

> +
>   The class also introduces the optional concept of an LED trigger. A trigger
>   is a kernel based source of led events. Triggers can either be simple or
>   complex. A simple trigger isn't configurable and is designed to slot into
> @@ -45,11 +53,12 @@ Is currently of the form:
>
>   "devicename:colour:function"
>
> -There have been calls for LED properties such as colour to be exported as
> -individual led class attributes. As a solution which doesn't incur as much
> -overhead, I suggest these become part of the device name. The naming scheme
> -above leaves scope for further attributes should they be needed. If sections
> -of the name don't apply, just leave that section blank.
> +If the colour extension is used hsv / rgb can be used instead of a specific
> +colour.  There have been calls for LED properties such as colour to be
> +exported as individual led class attributes. As a solution which doesn't
> +incur as much overhead, I suggest these become part of the device name.
> +The naming scheme above leaves scope for further attributes should they be
> +needed. If sections of the name don't apply, just leave that section blank.
>
>
>   Brightness setting API
>


-- 
Best regards,
Jacek Anaszewski