From: Armin Wolf <W_Armin@gmx.de>
To: ilpo.jarvinen@linux.intel.com, hdegoede@redhat.com,
chumuzero@gmail.com, corbet@lwn.net, cs@tuxedo.de,
wse@tuxedocomputers.com, ggo@tuxedocomputers.com
Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org, rdunlap@infradead.org,
alok.a.tiwari@oracle.com, linux-leds@vger.kernel.org,
lee@kernel.org, pobrn@protonmail.com, nathan@kernel.org
Subject: Re: [PATCH v5 0/2] Add support for Uniwill laptop features
Date: Mon, 27 Oct 2025 00:08:21 +0100 [thread overview]
Message-ID: <7e078590-28b2-4dc5-bccb-5593f2ce494d@gmx.de> (raw)
In-Reply-To: <20251005192049.18515-1-W_Armin@gmx.de>
Am 05.10.25 um 21:20 schrieb Armin Wolf:
> This patch series adds support for the various features found on
> laptops manufactured by Uniwill. Those features are:
>
> - battery charge limiting
> - RGB lightbar control
> - hwmon support
> - improved hotkey support
> - keyboard-related settings
>
> This patch series is based on the following out-of-tree drivers:
>
> - https://github.com/pobrn/qc71_laptop
> - https://gitlab.com/tuxedocomputers/development/packages/tuxedo-drivers
>
> Additionally the OEM software of the Intel Nuc x15 was
> reverse-engineered to have a better understanding about the underlying
> hardware interface.
>
> The first patch introduces the uniwill-laptop driver that consists of
> two parts: a WMI part responsible for receiving platform events and
> a ACPI part that does the majority of the work by talking to the
> underlying embedded controller using the INOU0000 ACPI device.
> The whole driver uses a DMI whitelist for identifying supported
> notebook models as both the ACPI device ID and the WMI device GUID
> are shared with a wide range of notebook models that might use a
> different embedded controller register layout.
>
> The second patch additionally adds some documentation for configuring
> and using said driver.
>
> Special thanks go to:
>
> - github user cyear for bring up this topic on the lm-sensors issue
> tracker and being the tester for various prototype versions
> - github user dumingqiao for testing the battery, lightbar and
> keyboard-related features
> - Tuxedo computers for giving advice on how to design the userspace
> interface
>
> NOTE: During testing it turned out that the touchpad_toggle sysfs
> attribute does not work. The reason for this is unknown, as the driver
> emulates the behaviour of the OEM application just fine. I suspect
> that this feature only controls some obscure key combination we dont
> know about, so i decided to send out this series regardless.
Any updates on this?
Thanks,
Armin Wolf
>
> Changes since v4:
> - add Tested-by tag
> - fix usage of guard() inside switch statement
>
> Changes since v3:
> - Add support for UNIWILL_OSD_SUPER_KEY_LOCK_CHANGED event
> - rename sysfs files to prepare for future changes
> - use kstrtobool() for handling sysfs input
> - add proper led locking
>
> Changed since v2:
> - Use the INOU0000 ACPI device for talking to the EC as it is much
> faster than the WMI interface used before. Additionally the OEM
> application also uses this ACPI inteface through a special driver.
> - Merge the uniwill-wmi driver into the uniwill-laptop driver as
> the WMI driver should only load when matching the DMI whitelist.
> - Various small fixes
>
> Changes since v1:
> - spelling fixes
> - add missing error handling when reading PWM duty cycle
> - fix error when setting the super key lock sysfs attribute
>
> Changes since the RFC series:
> - spelling fixes
> - mention the INOU0000 ACPI device inside thew documentation
> - use MILLIDEGREE_PER_DEGREE instead of 1000
> - use power_supply_get_property_direct() to prevent deadlock
> - add support for KEY_KBDILLUMDOWN and KEY_KBDILLUMUP
>
> Armin Wolf (2):
> platform/x86: Add Uniwill laptop driver
> Documentation: laptops: Add documentation for uniwill laptops
>
> .../ABI/testing/sysfs-driver-uniwill-laptop | 53 +
> Documentation/admin-guide/laptops/index.rst | 1 +
> .../admin-guide/laptops/uniwill-laptop.rst | 60 +
> Documentation/wmi/devices/uniwill-laptop.rst | 198 +++
> MAINTAINERS | 11 +
> drivers/platform/x86/Kconfig | 2 +
> drivers/platform/x86/Makefile | 3 +
> drivers/platform/x86/uniwill/Kconfig | 38 +
> drivers/platform/x86/uniwill/Makefile | 8 +
> drivers/platform/x86/uniwill/uniwill-acpi.c | 1549 +++++++++++++++++
> drivers/platform/x86/uniwill/uniwill-wmi.c | 92 +
> drivers/platform/x86/uniwill/uniwill-wmi.h | 127 ++
> 12 files changed, 2142 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-driver-uniwill-laptop
> create mode 100644 Documentation/admin-guide/laptops/uniwill-laptop.rst
> create mode 100644 Documentation/wmi/devices/uniwill-laptop.rst
> create mode 100644 drivers/platform/x86/uniwill/Kconfig
> create mode 100644 drivers/platform/x86/uniwill/Makefile
> create mode 100644 drivers/platform/x86/uniwill/uniwill-acpi.c
> create mode 100644 drivers/platform/x86/uniwill/uniwill-wmi.c
> create mode 100644 drivers/platform/x86/uniwill/uniwill-wmi.h
>
prev parent reply other threads:[~2025-10-26 23:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-05 19:20 [PATCH v5 0/2] Add support for Uniwill laptop features Armin Wolf
2025-10-05 19:20 ` [PATCH v5 1/2] platform/x86: Add Uniwill laptop driver Armin Wolf
2025-10-30 15:31 ` Ilpo Järvinen
2025-11-02 17:23 ` Armin Wolf
2025-10-05 19:20 ` [PATCH v5 2/2] Documentation: laptops: Add documentation for uniwill laptops Armin Wolf
2025-10-26 23:08 ` Armin Wolf [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e078590-28b2-4dc5-bccb-5593f2ce494d@gmx.de \
--to=w_armin@gmx.de \
--cc=alok.a.tiwari@oracle.com \
--cc=chumuzero@gmail.com \
--cc=corbet@lwn.net \
--cc=cs@tuxedo.de \
--cc=ggo@tuxedocomputers.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=lee@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=nathan@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=pobrn@protonmail.com \
--cc=rdunlap@infradead.org \
--cc=wse@tuxedocomputers.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox