messages from 2026-07-25 14:02:14 to 2026-08-02 12:11:46 UTC [more...]
[PATCH V2 0/2] leds: rgb: leds-group-multicolor: Implement default-intensity
2026-08-02 12:11 UTC (5+ messages)
` [PATCH V2 1/2] dt-bindings: leds-group-multicolor: Enable default-intensity
` [PATCH V2 2/2] leds: rgb: leds-group-multicolor: Implement default-intensity
[PATCH v4 00/12] leds: Add support for hardware-initiated hardware control trigger transition
2026-08-01 17:26 UTC (13+ messages)
` [PATCH v4 01/12] leds: Move led_trigger_is_hw_controlled() to the right place
` [PATCH v4 02/12] leds: class: Remove hardware control trigger when writing brightness
` [PATCH v4 03/12] leds: trigger: Add offloaded() callback and provide trigger_may_offload attribute
` [PATCH v4 04/12] leds: cros_ec: Implement offloaded() trigger callback
` [PATCH v4 05/12] leds: turris-omnia: Implement offloaded() trigger callback and declare hw_control_trigger
` [PATCH v4 06/12] leds: trigger: netdev: Implement offloaded() callback
` [PATCH v4 07/12] leds: trigger: Enforce strict checks in led_trigger_is_hw_controlled()
` [PATCH v4 08/12] leds: trigger: Do not attach trigger to a removing LED
` [PATCH v4 09/12] leds: trigger: Add led_trigger_notify_hw_control_changed() interface
` [PATCH v4 10/12] platform/x86: ideapad-laptop: Decouple hardware & classdev brightness for keyboard backlight
` [PATCH v4 11/12] platform/x86: ideapad-laptop: Serialize keyboard backlight notifications
` [PATCH v4 12/12] platform/x86: ideapad-laptop: Fully support auto keyboard backlight
[PATCH v6 00/14] mfd: lm3533: convert to OF bindings, improve support
2026-07-31 15:18 UTC (15+ messages)
` [PATCH v6 01/14] dt-bindings: leds: Document TI LM3533 LED controller
` [PATCH v6 02/14] mfd: lm3533: Remove driver specific regmap wrappers
` [PATCH v6 03/14] mfd: lm3533: Remove extern from shared functions in the header
` [PATCH v6 04/14] mfd: lm3533: Pass only regmap and light sensor presence to child devices
` [PATCH v6 05/14] iio: light: lm3533-als: Remove redundant pdata helpers
` [PATCH v6 06/14] mfd: lm3533-core: "
` [PATCH v6 07/14] mfd: lm3533: Use dev_groups in struct device_driver
` [PATCH v6 08/14] mfd: lm3533: Convert to use OF bindings
` [PATCH v6 09/14] mfd: lm3533: Add support for VIN power supply
` [PATCH v6 10/14] mfd: lm3533: Set DMA mask
` [PATCH v6 11/14] video: backlight: lm3533_bl: Improve logic of sysfs functions
` [PATCH v6 12/14] video: backlight: lm3533_bl: Set initial mapping mode from DT
` [PATCH v6 13/14] video: backlight: lm3533_bl: Implement backlight_scale property
[PATCH v5 00/14] mfd: lm3533: convert to OF bindings, improve support
2026-07-31 15:13 UTC (29+ messages)
` [PATCH v5 01/14] dt-bindings: leds: Document TI LM3533 LED controller
` [PATCH v5 02/14] mfd: lm3533: Remove driver specific regmap wrappers
` [PATCH v5 04/14] mfd: lm3533: Pass only regmap and light sensor presence to child devices
` [PATCH v5 05/14] iio: light: lm3533-als: Remove redundant pdata helpers
` [PATCH v5 06/14] mfd: lm3533-core: "
` [PATCH v5 08/14] mfd: lm3533: Convert to use OF bindings
[PATCH] leds: rgb: leds-qcom-lpg: Add PWM frequency mode support
2026-07-31 14:20 UTC (3+ messages)
[lee-leds:for-leds-next] BUILD SUCCESS 8d6b6c05b8e33d11e3fb3203309385e1a9cceecd
2026-07-31 14:16 UTC
[PATCH v8 0/2] Add support for LTC3208 multi-display driver
2026-07-29 23:22 UTC (5+ messages)
` [PATCH v8 1/2] dt-bindings: leds: Document LTC3208 Multidisplay LED Driver
` [PATCH v8 2/2] leds: ltc3208: Add driver for "
[PATCH 2/4] dt-bindings: vendor-prefixes: Add techvision
2026-07-29 16:38 UTC (3+ messages)
` (subset) "
[PATCH v10 0/7] mfd: Add support for Asus Transformer embedded controller
2026-07-29 12:33 UTC (5+ messages)
` [PATCH v10 2/7] mfd: Add driver for ASUS "
[PATCH v2 0/4] leds: pca9532: fix unchecked I2C reads and unbind use-after-free
2026-07-29 7:55 UTC (9+ messages)
` [PATCH v2 1/4] leds: pca9532: check i2c_smbus_read_byte_data() return value
` [PATCH v2 2/4] leds: pca9532: check return value in pca9532_setled()
` [PATCH v2 3/4] leds: pca9532: check return value in pca9532_gpio_get_value()
` [PATCH v2 4/4] leds: pca9532: fix use-after-free on unbind with N2100 beeper
[PATCH v4] dt-bindings: leds: lacie,ns2-leds: Convert to DT schema
2026-07-28 18:52 UTC (2+ messages)
[PATCH v4 0/1] leds: st1202: Add hardware-accelerated blink support
2026-07-28 11:15 UTC (3+ messages)
` [PATCH v4 1/1] "
[PATCH 1/1] leds: st1202: add hardware-accelerated blink support
2026-07-28 11:04 UTC (3+ messages)
[PATCH v3] dt-bindings: leds: lacie,ns2-leds: Convert to DT schema
2026-07-28 8:37 UTC (3+ messages)
[PATCH] leds: trigger: cpu: use cpuhp_setup_state_nocalls() for large CPU counts
2026-07-27 22:25 UTC (2+ messages)
[PATCH v8 0/4] leds: pca963x: Add multicolor support and enable Monza RGB LEDs
2026-07-27 15:11 UTC (9+ messages)
` [PATCH v8 1/4] dt-bindings: leds: nxp,pca963x: fix reg maximum for pca9635
` [PATCH v8 2/4] dt-bindings: leds: nxp,pca963x: add multicolor LED support
` [PATCH v8 3/4] leds: pca963x: add multicolor LED class support
` [PATCH v8 4/4] arm64: dts: monaco-arduino-monza: microcontroller LEDs
[PATCH] leds: pca9532: check i2c_smbus_read_byte_data() return value
2026-07-27 10:08 UTC (3+ messages)
[PATCH v7 0/4] leds: pca963x: Add multicolor support and enable Monza RGB LEDs
2026-07-27 8:36 UTC (5+ messages)
` [PATCH v7 2/4] dt-bindings: leds: nxp,pca963x: add multicolor LED support
[PATCH v18 0/2] Introduce Synology Microp driver
2026-07-25 21:07 UTC (6+ messages)
[PATCH v3 1/4] leds: cobalt-raq: Add missing MODULE_DESCRIPTION
2026-07-25 17:52 UTC (2+ messages)
` [PATCH 2/2] leds: cobalt-raq: Use devm_led_classdev_register() to fix use-after-unmap
[PATCH v3 3/4] leds: menf21bmc: Convert to dev_err_probe()
2026-07-25 17:51 UTC (2+ messages)
` [PATCH 1/2] leds: menf21bmc: Use brightness_set_blocking instead of brightness_set
[PATCH] leds: gpio: Skip unavailable LEDs during shutdown
2026-07-25 14:02 UTC (3+ messages)
` [PATCH v2] leds: gpio: Clear error pointers for skipped LEDs
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox