From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bryan Wu Subject: Re: [PATCH v2 3/3] leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default Date: Thu, 3 Jul 2014 11:59:14 -0700 Message-ID: References: <1404366636-25469-1-git-send-email-pmeerw@pmeerw.net> <1404366636-25469-3-git-send-email-pmeerw@pmeerw.net> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: Received: from mail-la0-f48.google.com ([209.85.215.48]:36766 "EHLO mail-la0-f48.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751698AbaGCS7g (ORCPT ); Thu, 3 Jul 2014 14:59:36 -0400 Received: by mail-la0-f48.google.com with SMTP id el20so482937lab.21 for ; Thu, 03 Jul 2014 11:59:35 -0700 (PDT) In-Reply-To: <1404366636-25469-3-git-send-email-pmeerw@pmeerw.net> Sender: linux-leds-owner@vger.kernel.org List-Id: linux-leds@vger.kernel.org To: Peter Meerwald Cc: Linux LED Subsystem , "rpurdie@rpsys.net" On Wed, Jul 2, 2014 at 10:50 PM, Peter Meerwald wrote: > mention support for 16 LED PCA9635 chip > > the default of MODE2's OUTDRV was incorrectly stated > Applied. Thanks, -Bryan > Signed-off-by: Peter Meerwald > --- > Documentation/devicetree/bindings/leds/pca963x.txt | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt > index aece3ea..dafbe99 100644 > --- a/Documentation/devicetree/bindings/leds/pca963x.txt > +++ b/Documentation/devicetree/bindings/leds/pca963x.txt > @@ -1,18 +1,19 @@ > LEDs connected to pca9632, pca9633 or pca9634 > > Required properties: > -- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634" > +- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" > > Optional properties: > -- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain > +- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults > + to open-drain, newer chips to totem pole) > - nxp,hw-blink : use hardware blinking instead of software blinking > > Each led is represented as a sub-node of the nxp,pca963x device. > > LED sub-node properties: > - label : (optional) see Documentation/devicetree/bindings/leds/common.txt > -- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633 > - or 0 to 7 in pca9634) > +- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, > + 0 to 7 in pca9634, or 0 to 15 in pca9635) > - linux,default-trigger : (optional) > see Documentation/devicetree/bindings/leds/common.txt > > -- > 1.7.9.5 >