Re: [PATCH v2 2/2] leds: aw2013: Add vddio regulator

[Pavel Machek <pavel@ucw.cz>]

[-- Attachment #1: Type: text/plain, Size: 1237 bytes --]

Hi!

> Some LEDs controllers are used with external pull-up for the interrupt
> line and the I2C lines, so we might need to enable a regulator to bring
> the lines into usable state. Otherwise, this might cause spurious
> interrupts and reading from I2C will fail.
> 
> Implement support for "vddio-supply" that is enabled by the aw2013 driver
> so that the regulator gets enabled when needed.
> 
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>

> @@ -348,16 +350,20 @@ static int aw2013_probe(struct i2c_client *client)
>  		goto error;
>  	}
>  
> -	chip->vcc_regulator = devm_regulator_get(&client->dev, "vcc");
> -	ret = PTR_ERR_OR_ZERO(chip->vcc_regulator);
> -	if (ret) {
> +	chip->regulators[0].supply = "vcc";
> +	chip->regulators[1].supply = "vddio";
> +	ret = devm_regulator_bulk_get(&client->dev,
> +				      ARRAY_SIZE(chip->regulators),
> +				      chip->regulators);
> +	if (ret < 0) {
>  		if (ret != -EPROBE_DEFER)
>  			dev_err(&client->dev,
>  				"Failed to request regulator: %d\n", ret);
>  		goto error;

Won't this cause failures when optional vddio is unavailable?

BR,
							Pavel
							
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]