Re: [PATCH v3 3/9] media: v4l2-flash: add support for flash/strobe duration

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Richard,

On Tue, Apr 29, 2025 at 02:59:08PM +0200, Richard Leitner wrote:
> Add support for the new V4L2_CID_FLASH_DURATION control to the v4l2
> flash led class.
> 
> Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
> ---
>  drivers/media/v4l2-core/v4l2-flash-led-class.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-flash-led-class.c b/drivers/media/v4l2-core/v4l2-flash-led-class.c
> index 355595a0fefac72c2f6941a30fa430d37dbdccfe..963b549480f6eb3b9eb0d80696a764de7ffcc1a2 100644
> --- a/drivers/media/v4l2-core/v4l2-flash-led-class.c
> +++ b/drivers/media/v4l2-core/v4l2-flash-led-class.c
> @@ -298,6 +298,12 @@ static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c)
>  		 * microamperes for flash intensity units.
>  		 */
>  		return led_set_flash_brightness(fled_cdev, c->val);
> +	case V4L2_CID_FLASH_DURATION:
> +		/*
> +		 * No conversion is needed as LED Flash class also uses
> +		 * microseconds for flash duration units.
> +		 */
> +		return led_set_flash_duration(fled_cdev, c->val);
>  	}
>  
>  	return -EINVAL;
> @@ -424,6 +430,13 @@ static void __fill_ctrl_init_data(struct v4l2_flash *v4l2_flash,
>  		ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
>  				  V4L2_CTRL_FLAG_EXECUTE_ON_WRITE;
>  	}
> +
> +	/* Init FLASH_DURATION ctrl data */
> +	if (has_flash_op(fled_cdev, timeout_set)) {
> +		ctrl_init_data[FLASH_DURATION].cid = V4L2_CID_FLASH_DURATION;
> +		ctrl_cfg = &ctrl_init_data[FLASH_DURATION].config;
> +		__lfs_to_v4l2_ctrl_config(&fled_cdev->duration, ctrl_cfg);
> +		ctrl_cfg->id = V4L2_CID_FLASH_DURATION;

Has this been compile tested? :-)

>  }
>  
>  static int v4l2_flash_init_controls(struct v4l2_flash *v4l2_flash,
> 

-- 
Regards,

Sakari Ailus