Re: [PATCH] leds: Ensure hardware blinking turns off when requested

[Eddie James <eajames@linux.ibm.com>]

On 5/20/22 12:11, Eddie James wrote:
> If an LED is blinking through the hardware and the trigger is deactivated,
> the driver will set the brightness to 0 to disable blinking. However, if
> the LED driver doesn't support non-blocking operations, the request for
> setting brightness to 0 will get queued. Then if a user requests a new
> non-zero brightness before the request for 0 brightness is executed, the
> LED blinking will not get disabled since the brightness will simply be
> updated.
> Fix this by flushing the workqueue before updating the requested
> brightness.


I just realized this never made it anywhere. Pavel, any thoughts?


Thanks,

Eddie


>
> Fixes: 4d71a4a12b13 ("leds: Add support for setting brightness in a synchronous way")
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
>   drivers/leds/led-class.c | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
> index 6a8ea94834fa..861a1cb5df5b 100644
> --- a/drivers/leds/led-class.c
> +++ b/drivers/leds/led-class.c
> @@ -55,6 +55,8 @@ static ssize_t brightness_store(struct device *dev,
>   
>   	if (state == LED_OFF)
>   		led_trigger_remove(led_cdev);
> +	/* flush out any request to disable blinking */
> +	flush_work(&led_cdev->set_brightness_work);
>   	led_set_brightness(led_cdev, state);
>   	flush_work(&led_cdev->set_brightness_work);
>