* [PATCH] leds: uleds: make max_brightness configurable
@ 2016-11-11 17:35 David Lechner
2016-11-13 12:29 ` Jacek Anaszewski
0 siblings, 1 reply; 2+ messages in thread
From: David Lechner @ 2016-11-11 17:35 UTC (permalink / raw)
To: Jacek Anaszewski, Richard Purdie; +Cc: David Lechner, linux-leds, linux-kernel
This adds support for configuring max_brightness when setting up a
userspace LED device. It also requires changing the brightness value
returned from a single byte to an integer. Since the uleds driver has
not made it into the mainline kernel yet, this is not breaking userspace.
Signed-off-by: David Lechner <david@lechnology.com>
---
drivers/leds/uleds.c | 16 +++++++++++-----
include/uapi/linux/uleds.h | 1 +
tools/leds/uledmon.c | 5 +++--
3 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/drivers/leds/uleds.c b/drivers/leds/uleds.c
index 2bbc73a..5e9e8a1 100644
--- a/drivers/leds/uleds.c
+++ b/drivers/leds/uleds.c
@@ -39,7 +39,7 @@ struct uleds_device {
struct mutex mutex;
enum uleds_state state;
wait_queue_head_t waitq;
- unsigned char brightness;
+ int brightness;
bool new_data;
};
@@ -67,7 +67,6 @@ static int uleds_open(struct inode *inode, struct file *file)
return -ENOMEM;
udev->led_cdev.name = udev->user_dev.name;
- udev->led_cdev.max_brightness = LED_FULL;
udev->led_cdev.brightness_set = uleds_brightness_set;
mutex_init(&udev->mutex);
@@ -117,6 +116,12 @@ static ssize_t uleds_write(struct file *file, const char __user *buffer,
goto out;
}
+ if (udev->user_dev.max_brightness <= 0) {
+ ret = -EINVAL;
+ goto out;
+ }
+ udev->led_cdev.max_brightness = udev->user_dev.max_brightness;
+
ret = devm_led_classdev_register(uleds_misc.this_device,
&udev->led_cdev);
if (ret < 0)
@@ -138,7 +143,7 @@ static ssize_t uleds_read(struct file *file, char __user *buffer, size_t count,
struct uleds_device *udev = file->private_data;
ssize_t retval;
- if (count == 0)
+ if (count < sizeof(udev->brightness))
return 0;
do {
@@ -151,9 +156,10 @@ static ssize_t uleds_read(struct file *file, char __user *buffer, size_t count,
} else if (!udev->new_data && (file->f_flags & O_NONBLOCK)) {
retval = -EAGAIN;
} else if (udev->new_data) {
- retval = copy_to_user(buffer, &udev->brightness, 1);
+ retval = copy_to_user(buffer, &udev->brightness,
+ sizeof(udev->brightness));
udev->new_data = false;
- retval = 1;
+ retval = sizeof(udev->brightness);
}
mutex_unlock(&udev->mutex);
diff --git a/include/uapi/linux/uleds.h b/include/uapi/linux/uleds.h
index 2545b79..3788d5e 100644
--- a/include/uapi/linux/uleds.h
+++ b/include/uapi/linux/uleds.h
@@ -18,6 +18,7 @@
struct uleds_user_dev {
char name[LEDS_MAX_NAME_SIZE];
+ int max_brightness;
};
#endif /* _UAPI__ULEDS_H_ */
diff --git a/tools/leds/uledmon.c b/tools/leds/uledmon.c
index 44d8634..163da85 100644
--- a/tools/leds/uledmon.c
+++ b/tools/leds/uledmon.c
@@ -22,7 +22,7 @@ int main(int argc, char const *argv[])
{
struct uleds_user_dev uleds_dev;
int fd, ret;
- unsigned char brightness;
+ int brightness;
struct timespec ts;
if (argc != 2) {
@@ -31,6 +31,7 @@ int main(int argc, char const *argv[])
}
strncpy(uleds_dev.name, argv[1], LEDS_MAX_NAME_SIZE);
+ uleds_dev.max_brightness = 100;
fd = open("/dev/uleds", O_RDWR);
if (fd == -1) {
@@ -46,7 +47,7 @@ int main(int argc, char const *argv[])
}
while (1) {
- ret = read(fd, &brightness, 1);
+ ret = read(fd, &brightness, sizeof(brightness));
if (ret == -1) {
perror("Failed to read from /dev/uleds");
close(fd);
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] leds: uleds: make max_brightness configurable
2016-11-11 17:35 [PATCH] leds: uleds: make max_brightness configurable David Lechner
@ 2016-11-13 12:29 ` Jacek Anaszewski
0 siblings, 0 replies; 2+ messages in thread
From: Jacek Anaszewski @ 2016-11-13 12:29 UTC (permalink / raw)
To: David Lechner, Jacek Anaszewski, Richard Purdie; +Cc: linux-leds, linux-kernel
Hi David,
Thanks for the patch. I fixed the original ones up.
Note that I changed also the macro name:
LEDS_MAX_NAME_SIZE -> LED_MAX_NAME_SIZE
to match the macro prefixes from linux/leds.h
Best regards,
Jacek Anaszewski
On 11/11/2016 06:35 PM, David Lechner wrote:
> This adds support for configuring max_brightness when setting up a
> userspace LED device. It also requires changing the brightness value
> returned from a single byte to an integer. Since the uleds driver has
> not made it into the mainline kernel yet, this is not breaking userspace.
>
> Signed-off-by: David Lechner <david@lechnology.com>
> ---
> drivers/leds/uleds.c | 16 +++++++++++-----
> include/uapi/linux/uleds.h | 1 +
> tools/leds/uledmon.c | 5 +++--
> 3 files changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/leds/uleds.c b/drivers/leds/uleds.c
> index 2bbc73a..5e9e8a1 100644
> --- a/drivers/leds/uleds.c
> +++ b/drivers/leds/uleds.c
> @@ -39,7 +39,7 @@ struct uleds_device {
> struct mutex mutex;
> enum uleds_state state;
> wait_queue_head_t waitq;
> - unsigned char brightness;
> + int brightness;
> bool new_data;
> };
>
> @@ -67,7 +67,6 @@ static int uleds_open(struct inode *inode, struct file *file)
> return -ENOMEM;
>
> udev->led_cdev.name = udev->user_dev.name;
> - udev->led_cdev.max_brightness = LED_FULL;
> udev->led_cdev.brightness_set = uleds_brightness_set;
>
> mutex_init(&udev->mutex);
> @@ -117,6 +116,12 @@ static ssize_t uleds_write(struct file *file, const char __user *buffer,
> goto out;
> }
>
> + if (udev->user_dev.max_brightness <= 0) {
> + ret = -EINVAL;
> + goto out;
> + }
> + udev->led_cdev.max_brightness = udev->user_dev.max_brightness;
> +
> ret = devm_led_classdev_register(uleds_misc.this_device,
> &udev->led_cdev);
> if (ret < 0)
> @@ -138,7 +143,7 @@ static ssize_t uleds_read(struct file *file, char __user *buffer, size_t count,
> struct uleds_device *udev = file->private_data;
> ssize_t retval;
>
> - if (count == 0)
> + if (count < sizeof(udev->brightness))
> return 0;
>
> do {
> @@ -151,9 +156,10 @@ static ssize_t uleds_read(struct file *file, char __user *buffer, size_t count,
> } else if (!udev->new_data && (file->f_flags & O_NONBLOCK)) {
> retval = -EAGAIN;
> } else if (udev->new_data) {
> - retval = copy_to_user(buffer, &udev->brightness, 1);
> + retval = copy_to_user(buffer, &udev->brightness,
> + sizeof(udev->brightness));
> udev->new_data = false;
> - retval = 1;
> + retval = sizeof(udev->brightness);
> }
>
> mutex_unlock(&udev->mutex);
> diff --git a/include/uapi/linux/uleds.h b/include/uapi/linux/uleds.h
> index 2545b79..3788d5e 100644
> --- a/include/uapi/linux/uleds.h
> +++ b/include/uapi/linux/uleds.h
> @@ -18,6 +18,7 @@
>
> struct uleds_user_dev {
> char name[LEDS_MAX_NAME_SIZE];
> + int max_brightness;
> };
>
> #endif /* _UAPI__ULEDS_H_ */
> diff --git a/tools/leds/uledmon.c b/tools/leds/uledmon.c
> index 44d8634..163da85 100644
> --- a/tools/leds/uledmon.c
> +++ b/tools/leds/uledmon.c
> @@ -22,7 +22,7 @@ int main(int argc, char const *argv[])
> {
> struct uleds_user_dev uleds_dev;
> int fd, ret;
> - unsigned char brightness;
> + int brightness;
> struct timespec ts;
>
> if (argc != 2) {
> @@ -31,6 +31,7 @@ int main(int argc, char const *argv[])
> }
>
> strncpy(uleds_dev.name, argv[1], LEDS_MAX_NAME_SIZE);
> + uleds_dev.max_brightness = 100;
>
> fd = open("/dev/uleds", O_RDWR);
> if (fd == -1) {
> @@ -46,7 +47,7 @@ int main(int argc, char const *argv[])
> }
>
> while (1) {
> - ret = read(fd, &brightness, 1);
> + ret = read(fd, &brightness, sizeof(brightness));
> if (ret == -1) {
> perror("Failed to read from /dev/uleds");
> close(fd);
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-11-13 12:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-11 17:35 [PATCH] leds: uleds: make max_brightness configurable David Lechner
2016-11-13 12:29 ` Jacek Anaszewski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).