Re: [PATCH V1 2/2] backlight: qcom-wled: Add support for WLED5 peripheral in PM8150L

[kgunda@codeaurora.org]

On 2020-03-09 03:17, Bjorn Andersson wrote:
> On Mon 02 Mar 04:55 PST 2020, Kiran Gunda wrote:
>> diff --git a/drivers/video/backlight/qcom-wled.c 
>> b/drivers/video/backlight/qcom-wled.c
> [..]
>> @@ -147,14 +187,39 @@ struct wled {
>>  	u32 max_brightness;
>>  	u32 short_count;
>>  	u32 auto_detect_count;
>> +	u32 version;
>>  	bool disabled_by_short;
>>  	bool has_short_detect;
>> +	bool cabc_disabled;
>>  	int short_irq;
>>  	int ovp_irq;
>> 
>>  	struct wled_config cfg;
>>  	struct delayed_work ovp_work;
>>  	int (*wled_set_brightness)(struct wled *wled, u16 brightness);
>> +	int (*cabc_config)(struct wled *wled, bool enable);
>> +	int (*wled_sync_toggle)(struct wled *wled);
> 
> Please split this patch in one that adds these and breaks out the wled3
> support, and then a second patch that adds wled5.
> 
Sure. Will make this change in the next post.
>> +};
>> +
> [..]
>> +static int wled5_set_brightness(struct wled *wled, u16 brightness)
>> +{
>> +	int rc, offset;
>> +	u16 low_limit = wled->max_brightness * 1 / 1000;
>> +	u8 v[2], brightness_msb_mask;
>> +
>> +	/* WLED5's lower limit is 0.1% */
>> +	if (brightness > 0 && brightness < low_limit)
>> +		brightness = low_limit;
>> +
>> +	brightness_msb_mask = 0xf;
>> +	if (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B)
>> +		brightness_msb_mask = 0x7f;
> 
> Why not just brightness &= wled->max_brightness? But given that it 
> seems
> like the framework ensures that brightness <= max_brightness, why not
> skip this altogether?
> 
Okay. I will modify the code to remove the min/max, low_limit checks in 
next post.
>> +
>> +	v[0] = brightness & 0xff;
>> +	v[1] = (brightness >> 8) & brightness_msb_mask;
>> +
>> +	offset = wled5_brightness_reg[wled->cfg.mod_sel];
>> +	rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset,
>> +			v, 2);
>> +	return rc;
>> +}
>> +
>>  static int wled4_set_brightness(struct wled *wled, u16 brightness)
>>  {
>>  	int rc, i;
>> @@ -237,7 +325,28 @@ static int wled_module_enable(struct wled *wled, 
>> int val)
>>  	return 0;
>>  }
>> 
>> -static int wled_sync_toggle(struct wled *wled)
>> +static int wled5_sync_toggle(struct wled *wled)
>> +{
>> +	int rc;
>> +	u8 val;
>> +
>> +	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
>> +					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
>> +	rc = regmap_update_bits(wled->regmap,
>> +				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
>> +				WLED5_SINK_REG_SYNC_MASK, val);
>> +	if (rc < 0)
>> +		return rc;
>> +
>> +	val = 0;
> 
> Just plug 0 in the function call.
> 
Sure. Will do it in next post.
>> +	rc = regmap_update_bits(wled->regmap,
>> +				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
>> +				WLED5_SINK_REG_SYNC_MASK, val);
>> +
>> +	return rc;
> 
> And return regmap_update_bits(...);
> 
Sure. Will do it in next post.
>> +}
>> +
> 
> Regards,
> Bjorn