From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Baolin Wang <baolin.wang@linaro.org>,
pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com
Cc: xiaotong.lu@spreadtrum.com, broonie@kernel.org,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
Date: Mon, 7 May 2018 22:13:21 +0200 [thread overview]
Message-ID: <db2df5f2-994b-066a-3edf-e9848356cecd@gmail.com> (raw)
In-Reply-To: <099f4075ec489e425b5f1e7668a078c05f0d8509.1525427961.git.baolin.wang@linaro.org>
Hi Baolin,
Thank you for the patch. Please find few notes below.
On 05/04/2018 12:08 PM, Baolin Wang wrote:
> This patch adds the binding documentation for Spreadtrum SC27xx series
> breathing light controller, which supports 3 outputs: red LED, green
> LED and blue LED.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> .../devicetree/bindings/leds/leds-sc27xx-bltc.txt | 39 ++++++++++++++++++++
> 1 file changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
> new file mode 100644
> index 0000000..d4e267d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
> @@ -0,0 +1,39 @@
> +LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
> +
> +The SC27xx breathing light controller supports to 3 outputs:
> +red LED, green LED and blue LED. Each LED can work at normal
> +PWM mode or breath light mode.
> +
> +Required properties:
> +- compatible: should be "sprd,sc27xx-bltc".
s/should/Should/
> +- #address-cells: must be 1.
s/must/Must/
> +- #size-cells: must be 0.
Ditto.
> +- reg: specify controller address.
s/specify/Specify/
> +
> +LED sub-node properties:
> +- reg: number of LED line (could be from 0 to 2).
s/number/Number/
> +- label: (optional) name of LED.
- label: see Documentation/devicetree/bindings/leds/common.txt
> +
> +Examples:
> +
> +led-controller@200 {
> + compatible = "sprd,sc27xx-bltc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x200>;
> +
> + red@0 {
s/red/led/
> + label = "red";
> + reg = <0x0>;
> + };
> +
> + green@1 {
s/green/led/
> + label = "green";
> + reg = <0x1>;
> + };
> +
> + blue@2 {
s/blue/led/
> + label = "blue";
> + reg = <0x2>;
> + };
> +};
>
--
Best regards,
Jacek Anaszewski
next prev parent reply other threads:[~2018-05-07 20:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-04 10:08 [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation Baolin Wang
2018-05-04 10:08 ` [PATCH 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver Baolin Wang
2018-05-05 5:26 ` kbuild test robot
2018-05-05 6:04 ` Xiaotong Lu (卢小通)
2018-05-07 20:13 ` Jacek Anaszewski
2018-05-08 2:21 ` Baolin Wang
2018-05-07 20:13 ` Jacek Anaszewski [this message]
2018-05-08 1:52 ` [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation Baolin Wang
2018-05-07 21:10 ` Rob Herring
2018-05-08 1:50 ` Baolin Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=db2df5f2-994b-066a-3edf-e9848356cecd@gmail.com \
--to=jacek.anaszewski@gmail.com \
--cc=baolin.wang@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=xiaotong.lu@spreadtrum.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).