[RFC PATCH 04/13] dt-bindings: mfd: ROHM BD72720

[Matti Vaittinen <mazziesaccount@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 10195 bytes --]

The ROHM BD72720 is a power management IC integrating regulators, GPIOs,
charger, LEDs, RTC and a clock gate.

Add dt-binding doc for ROHM BD72720.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
 .../bindings/mfd/rohm,bd72720-pmic.yaml       | 269 ++++++++++++++++++
 1 file changed, 269 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
new file mode 100644
index 000000000000..7f8168410121
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd72720-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD72720 Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  BD72720 is a single-chip power management IC for battery-powered portable
+  devices. The BD72720 integrates 10 bucks and 11 LDOs, and a 3000 mA
+  switching charger. The IC also includes a Coulomb counter, a real-time
+  clock (RTC), GPIOs and a 32.768 kHz clock gate.
+
+# In addition to the properties found from the charger node, the ROHM BD72720
+# uses properties from a static battery node. Please see the:
+# Documentation/devicetree/bindings/power/supply/rohm,vdr-battery.yaml
+#
+# Following properties are used
+# when present:
+#
+# charge-full-design-microamp-hours: Battry capacity in mAh
+# voltage-max-design-microvolt:      Maximum voltage
+# voltage-min-design-microvolt:      Minimum voltage system is still operating.
+# degrade-cycle-microamp-hours:      Capacity lost due to aging at each full
+#                                    charge cycle.
+# ocv-capacity-celsius:              Array of OCV table temperatures. 1/table.
+# ocv-capacity-table-<N>:            Table of OCV voltage/SOC pairs. Corresponds
+#                                    N.th temperature in ocv-capacity-celsius
+#
+# ROHM specific properties:
+# rohm,voltage-vdr-thresh-microvolt: Threshold for starting the VDR correction
+# rohm,volt-drop-soc:                Table of capacity values matching the
+#                                    values in VDR tables.
+# rohm,volt-drop-high-temp-microvolt: VDR table for high temperature
+# rohm,volt-drop-normal-temp-microvolt: VDR table for normal temperature
+# rohm,volt-drop-low-temp-microvolt:  VDR table for low temperature
+# rohm,volt-drop-very-low-temp-microvolt: VDR table for very low temperature
+#
+# VDR tables are (usually) determined for a specific battery by ROHM.
+# The battery node would then be referred from the charger node:
+#
+# monitored-battery = <&battery>;
+
+properties:
+  compatible:
+    const: rohm,bd72720
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags. See ../gpio/gpio.txt for more information.
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    const: bd71828-32k-out
+
+  rohm,clkout-open-drain:
+    description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+
+  rohm,charger-sense-resistor-milli-ohms:
+    minimum: 10
+    maximum: 50
+    description: |
+      BD72720 has a SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If some other but
+      30 mOhm resistor is used the resistance value should be given here in
+      milli Ohms.
+
+  regulators:
+    $ref: ../regulator/rohm,bd77270-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  leds:
+    $ref: ../leds/rohm,bd71828-leds.yaml
+
+  rohm,pin-dvs0:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      BD72720 has 4 different OTP options to determine the use of dvs0-pin.
+      OTP0 - regulator RUN state control.
+      OTP1 - GPI.
+      OTP2 - GPO.
+      OTP3 - Power sequencer output.
+      This property specifies the use of the pin.
+    enum:
+      - dvs-input
+      - gpi
+      - gpo
+
+  rohm,pin-dvs1:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      see rohm,pin-dvs0
+    enum:
+      - dvs-input
+      - gpi
+      - gpo
+
+  rohm,pin-exten0:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: BD72720 has an OTP option to use exten0-pin for different
+      purposes. Set this property accrdingly.
+    const: gpo
+
+  rohm,pin-exten1:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: BD72720 has an OTP option to use exten1-pin for different
+      purposes. Set this property accrdingly.
+    const: gpo
+
+  rohm,pin-fault_b:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: BD72720 has an OTP option to use fault_b-pin for different
+      purposes. Set this property accrdingly.
+    const: gpo
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71828";
+            reg = <0x4b>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            clocks = <&osc 0>;
+            #clock-cells = <0>;
+            clock-output-names = "bd71828-32k-out";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-reserved-ranges = <0 1>, <2 1>;
+
+            rohm,charger-sense-resistor-ohms = <10000000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <2000000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck7: BUCK7 {
+                    regulator-name = "buck7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo7_reg: LDO7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
+
+            leds {
+                compatible = "rohm,bd71828-leds";
+
+                led-1 {
+                    rohm,led-compatible = "bd71828-grnled";
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+                led-2 {
+                    rohm,led-compatible = "bd71828-ambled";
+                    function = LED_FUNCTION_CHARGING;
+                    color = <LED_COLOR_ID_AMBER>;
+                };
+            };
+        };
+    };
-- 
2.51.0


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]