Linux LED subsystem development
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Peter LaDow" <pladow@gmail.com>
Cc: linux-leds@vger.kernel.org, lee@kernel.org
Subject: Re: [PATCH v2] leds: lp5860: Add I2C interface support
Date: Fri, 20 Nov 2026 17:48:22 +0000	[thread overview]
Message-ID: <sashiko-outbox-225718@kernel.org> (raw)
In-Reply-To: <20261120-add-i2c-support-for-lp5860-v2-1-bcb2ce00a7f5@gmail.com>

> From: Peter LaDow <pladow@gmail.com>
> 
> This patch adds I2C bus support to the Texas Instruments LP5860 RGB LED
> matrix driver.
> 
> The LP5860 supports both SPI and I2C interfaces depending on the hardware
> IFS pin configuration, but the existing driver only implements the SPI
> bus interface (leds-lp5860-spi).
> 
> Changes include:
> - Adding the leds-lp5860-i2c bus driver module to handle the LP5860's
>   10-bit register addressing scheme over I2C.
> - Updating Kconfig and Makefile so I2C and SPI bus support can be built
>   independently or together.
> 
> Tested on ZymqMP (ZU3) with an LP5860 connected over an AXI IIC at
> base address 0x40 (A1=0, A0=0) at 400kHz.
> 
> Signed-off-by: Peter LaDow <pladow@gmail.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261120-add-i2c-support-for-lp5860-v2-1-bcb2ce00a7f5@gmail.com?part=1


      reply	other threads:[~2026-11-20 17:48 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 17:40 [PATCH v2] leds: lp5860: Add I2C interface support Peter LaDow via B4 Relay
2026-11-20 17:48 ` sashiko-bot [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-225718@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pladow@gmail.com \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox