From: "Harald Heigl" <Harald_Heigl@gmx.at>
To: 'LVM general discussion and development' <linux-lvm@redhat.com>
Subject: Re: [linux-lvm] Disk Partitioning tools, GUI preferably- best for LVM Logical Volume Management ; jor
Date: Sat, 24 Jul 2010 18:54:53 +0200 [thread overview]
Message-ID: <001601cb2b50$f13ee4c0$d3bcae40$@at> (raw)
In-Reply-To: <1279942095.12963.1386480183@webmail.messagingengine.com>
Hi!
>[This list is for all LVM questions, not just RedHat distro questions,
>yes?]
Yes this list is for lvm in general ...
>[BTW, is making that 4th partition a logical one, & putting more
>partitions in there necessary anymore?
The limitation of the 4 partitions is not a linux thing, the "Master Boot
Record" (MBR) is on a single sector on your disk (sectors are usually
512Bytes big), it's a historical thing. The MBR can hold 4 entries and not
more.
>I'd greatly appreciate a competent GUI partitioner. I only partition
>disks a few times per year, & it's great to have the GUI have the
>commands available to do the partitions ...
As said you may use one drive as pv and divide that into lvs. In Fedora
there is also a gui for lvm, but I didn't use it really, so I can't
recommend it. I always use command-line for this (partitioning (if ever
necessary) with fdisk and lv-commands)
The reasons for dos-partiton as Stuart said:
>3) you are using the grub boot loader, which doesn't speak LVM yet
3) If you have kubuntu 10.04 (I suggest 10.4 is a spell error) you should
have grub2 and therefore it should be lvm-aware even on your boot disk (but
not every distro can handle this, that�s true ...)
Greetings,
Harald Heigl
>-----Urspr�ngliche Nachricht-----
>Von: linux-lvm-bounces@redhat.com [mailto:linux-lvm-bounces@redhat.com]
>Im Auftrag von giovanni_re
>Gesendet: Samstag, 24. Juli 2010 05:28
>An: linux-lvm@redhat.com
>Betreff: [linux-lvm] Disk Partitioning tools, GUI preferably- best for
>LVM Logical Volume Management ; jor
>
>What are the best tools (ie sw) for doing disk partitioning? Preferably
>GUI. but, console mode suggestions welcome if that's best, or all there
>is.
>
>For use in KUbuntu 10.4.
>
>[This list is for all LVM questions, not just RedHat distro questions,
>yes?]
>
>
>==
>KDE 3 used to have qtPartEd, which used to be able to actually _create_
>partitions. That's not in KDE4, ie in KUbuntu 10.4.
>
>I've installed GPartEd, but it can't see into LVs - Logical volumes.
>Thus, it can't _create_ anything there.
>
>I'd greatly appreciate a competent GUI partitioner. I only partition
>disks a few times per year, & it's great to have the GUI have the
>commands available to do the partitions, so one doesn't have to spend
>the time to keep up on the specifics of commands to deal with new disk
>formats & partitioning methods, & do hand calculations of partitions
>sizes, etc.
>
>
>==
>I installed KU 10.4 with the alternate installer. I've used the console
>mode installer for many years, probably because it gives me the ability
>to partition my disks well.
>
>I usually put, in order from the beginning, two Linux partititions, a
>swap partition, then make a LVM for the 4th partition. & put a "/home"
>partition there, then leave space for further partitions - like, if i
>want to add another linux partition - so I can set up different distros
>& boot into them.
>
>
>[BTW, is making that 4th partition a logical one, & putting more
>partitions in there necessary anymore? Used to be that disks were
>limited at 4 partitions, & one had to make a big 4th partition & put sub
>partitions inside that. After all these years - in Linux, can we yet
>put as many partitions as we want without making a logical partition? I
>think there was a limit of 16 partitions before. Can more than that be
>done now?]
>
>
>==
>So, I've got that big LV 4th partition, with empty space (2TB drive),
>and now I want to create some more linux partitions so I can install
>some other distros.
>
>But, GPartEd doesn't show what's in the LVM. And, thus it further can't
>create any partions there. - It's a tragedy GPartEd isn't better
>maintained. :(
>
>
>==
>So, what are the easiest tools to create additional partions in Logical
>Volumes?
>
>Thanks :)
>
>== Join in the Global weekly meetings, via VOIP, about all Free SW HW &
>Culture
>http://sites.google.com/site/berkeleytip/
>
>_______________________________________________
>linux-lvm mailing list
>linux-lvm@redhat.com
>https://www.redhat.com/mailman/listinfo/linux-lvm
>read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
next prev parent reply other threads:[~2010-07-24 16:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-24 3:28 [linux-lvm] Disk Partitioning tools, GUI preferably- best for LVM Logical Volume Management ; jor giovanni_re
2010-07-24 4:39 ` Stuart D. Gathman
2010-07-24 16:54 ` Harald Heigl [this message]
2010-07-26 8:45 ` Bryn M. Reeves
2010-07-26 12:16 ` Stuart D. Gathman
2010-07-26 12:43 ` Bryn M. Reeves
2010-07-26 13:59 ` Stuart D. Gathman
2010-07-26 14:04 ` Bryn M. Reeves
2010-07-26 16:48 ` Stuart D. Gathman
2010-07-26 22:32 ` [linux-lvm] Disk Partitioning tools, - for having multi distros bootable - " giovanni_re
2010-07-28 18:10 ` Stuart D Gathman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001601cb2b50$f13ee4c0$d3bcae40$@at' \
--to=harald_heigl@gmx.at \
--cc=linux-lvm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).