[linux-lvm] read_intr errors

["Erick Calder" <e@arix.com>]

hi everyone, I've read a number of dialogues on the archives concerning the
errors below which I'm getting but have not found any answers:

I'm running RedHat 7.0 (2.4.9 kernel + LVM 1.0.1rc1) on a little PIII box
and I'm using the ide controllers built into the motherboard (drivers built
into the kernel - not modules).  I have CONFIG_IDEDISK_MULTI_MODE set to y
in the .config for the kernel.  The drive is an IBM-DTLA-307030 (as reported
by /proc/ide) and is brand new.

here are the errors:

Oct 17 02:00:34 beowulf kernel: hdc: read_intr: error=0x04 {
DriveStatusError }
Oct 17 02:00:34 beowulf kernel: hdc: read_intr: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Oct 17 02:00:34 beowulf kernel: hdc: read_intr: error=0x04 {
DriveStatusError }
Oct 17 02:00:34 beowulf kernel: ide1: reset: success

I've been moving data in and out of the drive and everything seems ok but I
get lots of the above errors which leaves me with a queasy feeling...
anyone know what the deal is with this?

1k thx - e