From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Erick Calder" <e@arix.com>
Date: Wed, 17 Oct 2001 02:27:21 -0700
Message-ID: <002601c156ed$ecc4c180$0300000a@pacbell.net>
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
In-Reply-To: <20011016234034.B7778@sistina.com>
Subject: [linux-lvm] read_intr errors
Sender: linux-lvm-admin@sistina.com
Errors-To: linux-lvm-admin@sistina.com
Reply-To: linux-lvm@sistina.com
List-Help: <mailto:linux-lvm-request@sistina.com?subject=help>
List-Post: <mailto:linux-lvm@sistina.com>
List-Subscribe: <http://lists.sistina.com/mailman/listinfo/linux-lvm>,
	<mailto:linux-lvm-request@sistina.com?subject=subscribe>
List-Unsubscribe: <http://lists.sistina.com/mailman/listinfo/linux-lvm>,
	<mailto:linux-lvm-request@sistina.com?subject=unsubscribe>
List-Archive: <http://lists.sistina.com/pipermail/linux-lvm/>
List-Id: <linux-lvm.redhat.com>
Content-Type: text/plain; charset="us-ascii"
To: linux-lvm@sistina.com

hi everyone, I've read a number of dialogues on the archives concerning the
errors below which I'm getting but have not found any answers:

I'm running RedHat 7.0 (2.4.9 kernel + LVM 1.0.1rc1) on a little PIII box
and I'm using the ide controllers built into the motherboard (drivers built
into the kernel - not modules).  I have CONFIG_IDEDISK_MULTI_MODE set to y
in the .config for the kernel.  The drive is an IBM-DTLA-307030 (as reported
by /proc/ide) and is brand new.

here are the errors:

Oct 17 02:00:34 beowulf kernel: hdc: read_intr: error=0x04 {
DriveStatusError }
Oct 17 02:00:34 beowulf kernel: hdc: read_intr: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Oct 17 02:00:34 beowulf kernel: hdc: read_intr: error=0x04 {
DriveStatusError }
Oct 17 02:00:34 beowulf kernel: ide1: reset: success

I've been moving data in and out of the drive and everything seems ok but I
get lots of the above errors which leaves me with a queasy feeling...
anyone know what the deal is with this?

1k thx - e