Re: [linux-lvm] Can someone _please_ tell me whats going on?

[Bradley Alexander <storm@tux.org>]

On Sun, 2001-12-16 at 22:13, Friedrich Lobenstock wrote:
> On 16 Dec 2001 21:57, Bradley Alexander wrote:
> 
> > hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=211681280,
> > sector=0
> > hdc: DMA disabled
> > hdd: DMA disabled
> > ide1: reset: success
> 
> This looks like a IDE-cable problem to me. Checked the length?
> Is it really a ATA66/100 cable? Do you use a drive cage?

Its a standard IDE cable. I have a 40-pin/40-wire cable and a
40-pin/80-wire (I'm assuming this is an ATA66/100 cable). Originally, i
had both drives on the ATA cable, but since I split them to different
channels, I had to use a standard IDE cable on the second channel.
However, I was getting the same errors when both were on the ATA cable
as well.

-- 
--Brad
============================================================================
Bradley M. Alexander, CISSP              |   Co-Chairman,
Beowulf System Admin/Security Specialist |    NoVALUG/DCLUG Security SIG
Debian/GNU Linux Developer		 |   storm [at] debian.org
                                         |   storm [at] tux.org
============================================================================
It's always a good idea to keep the pointy end going forward as
much as possible.
					--Rules of the Air, #21