From: IpSo <ipso@snappymail.ca>
To: linux-lvm@sistina.com
Subject: [linux-lvm] VG dissappeared without a trace?
Date: Sun Jan 6 03:33:02 2002 [thread overview]
Message-ID: <1010309724.3c381a5ce8cbe@www.snappymail.ca> (raw)
I was trying to extend my LVM partition to another disk, but being late and my
head not screwed on straight, things went terribly wrong.
I was using diskdrake (from Mandrake) and what I did was create a LVM partition
/dev/hdb6 and added it to my "quantum" VG which contained a single partition of
/dev/hda6. I was simply doing this as a test (my first time using LVM), so as
soon as it worked, I removed /dev/hdb6 from the "quantum" VG. I then proceeded
to create a larger partition /dev/hdc that I wanted to add to "quantum" for
good. I added it to the "quantum" VG and attemped to resize the "quantum" VG to
the full size of both /dev/hda6 (17gb) and /dev/hdc (12gb). Everything "seemed"
to go fine, so I exited from diskdrake and rebooted.
During the reboot, it said it couldn't mount /dev/quantum/1 as it was not a
proper block device. So I ran the following programs to try and collect as much
data as possible:
[root@ipso root]# pvscan -v
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- walking through all physical volumes found
pvscan -- inactive PV "/dev/hda6" is associated to an unknown VG (run vgscan)
pvscan -- inactive PV "/dev/hdb6" is associated to an unknown VG (run vgscan)
pvscan -- total: 2 [19.01 GB] / in use: 2 [19.01 GB] / in no VG: 0 [0]
[root@ipso root]# vgscan -v
vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- no volume groups found
vgcfgrestore -n quantum -l -f /etc/lvmconf/quantum.conf.1.old
--- Volume group ---
VG Name quantum
VG Access read/write
VG Status NOT available/resizable
VG # 0
MAX LV 256
Cur LV 1
Open LV 0
MAX LV Size 255.99 GB
Max PV 256
Cur PV 2
Act PV 2
VG Size 19 GB
PE Size 4 MB
Total PE 4865
Alloc PE / Size 4328 / 16.91 GB
Free PE / Size 537 / 2.1 GB
VG UUID 54LQnu-1gQl-mNuO-KR7U-yypa-woKi-iu7PRF
[root@ipso lvmconf]# vgcfgrestore -n quantum -l -f /etc/lvmconf/quantum.conf
--- Volume group ---
VG Name quantum
VG Access read/write
VG Status NOT available/resizable
VG # 0
MAX LV 256
Cur LV 1
Open LV 0
MAX LV Size 255.99 GB
Max PV 256
Cur PV 3
Act PV 3
VG Size 30.88 GB
PE Size 4 MB
Total PE 7904
Alloc PE / Size 4328 / 16.91 GB
Free PE / Size 3576 / 13.97 GB
VG UUID 54LQnu-1gQl-mNuO-KR7U-yypa-woKi-iu7PRF
[root@ipso lvmconf]# pvdata -a /dev/hda6
--- Physical volume ---
PV Name /dev/hda6
VG Name quantum
PV Size 16.91 GB / NOT usable 3.12 MB [LVM: 137 KB]
PV# 1
PV Status NOT available
Allocatable yes (but full)
Cur LV 1
PE Size (KByte) 4096
Total PE 4328
Free PE 0
Allocated PE 4328
PV UUID e42Ge3-mpoP-PNat-1xLg-TMjr-4hRU-Q2agG9
--- Volume group ---
VG Name
VG Access read/write
VG Status NOT available/resizable
VG # 0
MAX LV 256
Cur LV 1
Open LV 0
MAX LV Size 255.99 GB
Max PV 256
Cur PV 2
Act PV 2
VG Size 19 GB
PE Size 4 MB
Total PE 4865
Alloc PE / Size 4328 / 16.91 GB
Free PE / Size 537 / 2.1 GB
VG UUID 54LQnu-1gQl-mNuO-KR7U-yypa-woKi-iu7PRF
--- List of logical volumes ---
pvdata -- logical volume "/dev/quantum/1" at offset 0
pvdata -- logical volume struct at offset 1 is empty
pvdata -- logical volume struct at offset 2 is empty
pvdata -- logical volume struct at offset 3 is empty
pvdata -- logical volume struct at offset 4 is empty
pvdata -- logical volume struct at offset 5 is empty
pvdata -- logical volume struct at offset 6 is empty
pvdata -- logical volume struct at offset 7 is empty
pvdata -- logical volume struct at offset 8 is empty
pvdata -- logical volume struct at offset 9 is empty
pvdata -- logical volume struct at offset 10 is empty
...
pvdata -- logical volume struct at offset 254 is empty
pvdata -- logical volume struct at offset 255 is empty
--- List of physical extents ---
PE: 00000 LV: 001 LE: 00000
PE: 00001 LV: 001 LE: 00001
PE: 00002 LV: 001 LE: 00002
...
PE: 04326 LV: 001 LE: 04326
PE: 04327 LV: 001 LE: 04327
--- List of physical volume UUIDs ---
000: e42Ge3mpoPPNat1xLgTMjr4hRUQ2agG9
001: --- EMPTY ---
[root@ipso lvmconf]# pvdata -a /dev/hdb6
--- Physical volume ---
PV Name /dev/hdb6
VG Name quantum
PV Size 2.1 GB / NOT usable 1.75 MB [LVM: 123 KB]
PV# 2
PV Status NOT available
Allocatable yes
Cur LV 0
PE Size (KByte) 4096
Total PE 537
Free PE 537
Allocated PE 0
PV UUID PFyl3d-HSJD-adUL-vpzS-Sib3-jy78-tgR569
--- Volume group ---
VG Name
VG Access read/write
VG Status NOT available/resizable
VG # 0
MAX LV 256
Cur LV 1
Open LV 0
MAX LV Size 255.99 GB
Max PV 256
Cur PV 3
Act PV 3
VG Size 30.88 GB
PE Size 4 MB
Total PE 7904
Alloc PE / Size 4328 / 16.91 GB
Free PE / Size 3576 / 13.97 GB
VG UUID 54LQnu-1gQl-mNuO-KR7U-yypa-woKi-iu7PRF
--- List of logical volumes ---
pvdata -- logical volume "/dev/quantum/1" at offset 0
pvdata -- logical volume struct at offset 1 is empty
pvdata -- logical volume struct at offset 2 is empty
pvdata -- logical volume struct at offset 3 is empty
...
pvdata -- logical volume struct at offset 254 is empty
pvdata -- logical volume struct at offset 255 is empty
--- List of physical extents ---
PE: 00000 LV: --- LE: -----
PE: 00001 LV: --- LE: -----
PE: 00002 LV: --- LE: -----
...
PE: 00535 LV: --- LE: -----
PE: 00536 LV: --- LE: -----
--- List of physical volume UUIDs ---
000: e42Ge3mpoPPNat1xLgTMjr4hRUQ2agG9
001: PFyl3dHSJDadULvpzSSib3jy78tgR569
002: TeWEsY1qLF4PPwfZAlljyT3KiE4CCajd
Unfortunately, I deleted the partition from the larger drive I was planning on
adding to the "quantum" VG, (/dev/hdc it didn't have any data on it yet). I
don't really care about /dev/hdb6 either, I would just like the data off of
/dev/hda6.
Partition table for: /dev/hda6
Device Boot Start End Blocks Id System
/dev/hda1 * 1 507 255496+ 82 Linux swap
/dev/hda2 508 39813 19810224 5 Extended
/dev/hda5 508 4633 2079472+ 83 Linux
/dev/hda6 4634 39813 17730688+ 8e Linux LVM
Any ideas how I can get /dev/hda6 mountable again? Thanks.
IpSo
--------------------------------------------------------------------
Never worry about viruses in your Email again.
Get your FREE! virus scanned Email accounts at http://snappymail.ca
next reply other threads:[~2002-01-06 3:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-06 3:33 IpSo [this message]
2002-01-06 13:03 ` [linux-lvm] VG dissappeared without a trace? IpSo
2002-01-06 16:22 ` Andreas Dilger
2002-01-06 17:29 ` IpSo
2002-01-08 20:27 ` [linux-lvm] A way to bypass LVM and extract the raw data off? IpSo
2002-01-08 20:35 ` Petro
2002-01-08 21:03 ` IpSo
2002-01-09 13:41 ` Andreas Dilger
2002-01-09 15:44 ` IpSo
2002-01-09 16:26 ` Andreas Dilger
2002-01-09 17:26 ` IpSo
2002-01-08 21:05 ` Andreas Dilger
2002-01-09 9:02 ` IpSo
2002-01-09 10:30 ` Holger Grothe
2002-01-09 12:04 ` IpSo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1010309724.3c381a5ce8cbe@www.snappymail.ca \
--to=ipso@snappymail.ca \
--cc=linux-lvm@sistina.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox