From: Andrew Patterson <andrew@fc.hp.com>
To: linux-lvm@sistina.com
Subject: [linux-lvm] Oops when running snapshots
Date: Wed Jul 9 17:27:02 2003 [thread overview]
Message-ID: <1057789596.1368.28.camel@lvadplx> (raw)
Ran a load test last night where we created snapshots two snapshots
every 2 hours under heavy file system load. We got the following oops:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
802895f5
*pde = 55bd7001
Oops: 0002
CPU: 2
EIP: 0010:[<802895f5>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010206
eax: 00000000 ebx: f8ab2118 ecx: f8a79048 edx: f8a79030
esi: 00810180 edi: b4db0000 ebp: 00000820 esp: a2765c4c
ds: 0018 es: 0018 ss: 0018
Process vsftpd (pid: 7309, stackpage=a2765000)
Stack: b4db0000 b4db0170 f69b3170 00ea8000 00000080 00000006 00000070
00000000
80286031 a2765caa a2765cac 00810180 b4db0000 00003a02 e338c840
00800070
00ea8000 00000000 00000000 f69b3000 f68a0000 00810180 00000800
08208cbc
Call Trace: [<80286031>] [<80286117>] [<80219ccc>] [<80219d41>]
[<801d209f>]
[<801d26eb>] [<801d2ac7>] [<801d2b2a>] [<801387fd>] [<801d2952>]
[<80139b
1d327e>] [<80137807>] [<80106f27>]
Code: 89 10 c7 01 00 00 00 00 c7 41 04 00 00 00 00 8b 03 89 48 04
>>EIP; 802895f5 <lvm_snapshot_remap_block+a9/f8> <=====
>>ebx; f8ab2118 <[nfstracker].bss.end+490c5/ffe98fa9>
>>ecx; f8a79048 <[nfstracker].bss.end+fff5/ffe98fa9>
>>edx; f8a79030 <[nfstracker].bss.end+ffdd/ffe98fa9>
>>edi; b4db0000 <_end+3499065c/7847565c>
>>esp; a2765c4c <_end+223462a8/7847565c>
Trace; 80286031 <lvm_map+3b9/490>
Trace; 80286117 <lvm_make_request_fn+f/1c>
Trace; 80219ccc <generic_make_request+11c/12c>
Trace; 80219d41 <submit_bh+65/80>
Trace; 801d209f <submit_page+57/74>
Trace; 801d26eb <page_state_convert+40b/4a0>
Trace; 801d2ac7 <linvfs_writepage+3b/e0>
Trace; 801d2b2a <linvfs_writepage+9e/e0>
Trace; 801387fd <write_some_buffers+9d/14c>
Trace; 801d2952 <linvfs_get_block+1e/24>
Code; 802895f5 <lvm_snapshot_remap_block+a9/f8>
00000000 <_EIP>:
Code; 802895f5 <lvm_snapshot_remap_block+a9/f8> <=====
0: 89 10 mov %edx,(%eax) <=====
Code; 802895f7 <lvm_snapshot_remap_block+ab/f8>
2: c7 01 00 00 00 00 movl $0x0,(%ecx)
Code; 802895fd <lvm_snapshot_remap_block+b1/f8>
Trace; 80219d41 <submit_bh+65/80>
Trace; 801d209f <submit_page+57/74>
Trace; 801d26eb <page_state_convert+40b/4a0>
Trace; 801d2ac7 <linvfs_writepage+3b/e0>
Trace; 801d2b2a <linvfs_writepage+9e/e0>
Trace; 801387fd <write_some_buffers+9d/14c>
Trace; 801d2952 <linvfs_get_block+1e/24>
Code; 802895f5 <lvm_snapshot_remap_block+a9/f8>
00000000 <_EIP>:
Code; 802895f5 <lvm_snapshot_remap_block+a9/f8> <=====
0: 89 10 mov %edx,(%eax) <=====
Code; 802895f7 <lvm_snapshot_remap_block+ab/f8>
2: c7 01 00 00 00 00 movl $0x0,(%ecx)
Code; 802895fd <lvm_snapshot_remap_block+b1/f8>
8: c7 41 04 00 00 00 00 movl $0x0,0x4(%ecx)
Code; 80289604 <lvm_snapshot_remap_block+b8/f8>
f: 8b 03 mov (%ebx),%eax
Code; 80289606 <lvm_snapshot_remap_block+ba/f8>
11: 89 48 04 mov %ecx,0x4(%eax)
10 warnings issued. Results may not be reliable.
This was run on a 2.4.21 system using LVM 1.0.7. The system has 2GB of
memory and is configured with HIGHME64G. We are running the latest
2.4.21 XFS and are using xfs_freeze to quiesce the file system. We are
not using the VFS_LOCK patch.
Anyone have any ideas what may be causing this?
Thanks,
Andrew
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Andrew Patterson Voice: (970) 898-3261
Hewlett-Packard Company Email: andrew@fc.hp.com
next reply other threads:[~2003-07-09 17:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-09 17:27 Andrew Patterson [this message]
2003-07-10 4:34 ` [linux-lvm] Oops when running snapshots Heinz J . Mauelshagen
2003-07-10 12:28 ` Andrew Patterson
2003-08-15 17:16 ` Andrew Patterson
-- strict thread matches above, loose matches on Subject: below --
2004-01-05 4:36 Steve McIntyre
2004-01-12 9:36 ` Steve McIntyre
2004-01-14 8:37 ` Andrew Patterson
2004-01-21 5:35 ` Steve McIntyre
2004-01-12 10:27 Little, Chris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1057789596.1368.28.camel@lvadplx \
--to=andrew@fc.hp.com \
--cc=linux-lvm@sistina.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox