From: Ming Zhang <mingz@ele.uri.edu>
To: LVM general discussion and development <linux-lvm@redhat.com>
Subject: [linux-lvm] can data be found after cleaning the first sector by mistake? (tears in my eyes)
Date: Sun, 23 Jan 2005 17:59:46 -0500 [thread overview]
Message-ID: <1106521186.3130.109.camel@localhost.localdomain> (raw)
I have 2 disk sda and sdb, build a md0 on them, and create vg and lv on
top of md0.
when i upgraded my system from fedora 2 to 3, it reported my sda and sdb
contain uninitialized partition table and need to clean. i mad a stupid
error by pressing yes!
now no matter what command i execute, it reports.
[root@localhost ~]# lvscan
Logical volume (vol1) contains an incomplete mapping table.
Volume group "datavg" not found
[root@localhost ~]# pvscan -P
Partial mode. Incomplete volume groups will be activated read-only.
Logical volume (vol1) contains an incomplete mapping table.
No matching physical volumes found
[root@localhost ~]# vgmknodes
Logical volume (vol1) contains an incomplete mapping table.
Volume group "datavg" not found
i wonder if there is any way to get my personal data back. thanks so
much if anybody can give a hint!
these are my system information
[root@localhost ~]# fdisk /dev/sda -l
Disk /dev/sda: 164.6 GB, 164696555520 bytes
255 heads, 63 sectors/track, 20023 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
[root@localhost ~]# fdisk /dev/sdb -l
Disk /dev/sdb: 164.6 GB, 164696555520 bytes
255 heads, 63 sectors/track, 20023 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
[root@localhost ~]# more /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sda[0] sdb[1]
160836416 blocks [2/2] [UU]
unused devices: <none>
next reply other threads:[~2005-01-23 22:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-23 22:59 Ming Zhang [this message]
2005-01-23 23:06 ` [linux-lvm] can data be found after cleaning the first sector by mistake? (tears in my eyes) Ming Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1106521186.3130.109.camel@localhost.localdomain \
--to=mingz@ele.uri.edu \
--cc=linux-lvm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox