* [linux-lvm] I/O errors on two disks
@ 2007-05-02 13:44 Daniel Davidson
0 siblings, 0 replies; only message in thread
From: Daniel Davidson @ 2007-05-02 13:44 UTC (permalink / raw)
To: linux-lvm
I have six promise vtrack 15200 arrays in raid 5 config that I have
LVM'ed together to hold a disk copy of my backup data. I restarted the
machine yesterday for the first time in a while and the filesystem seems
to be not quite right. On both of these devices I am getting the
following errors:
[root@sbackup ~]# vgscan
Reading all physical volumes. This may take a while...
/dev/sdc: read failed after 0 of 4096 at 10499998285824: Input/output
error
/dev/sdf: read failed after 0 of 4096 at 10499996450816: Input/output
error
Found volume group "backupdisk" using metadata type lvm2
It doesnt make since that there is a bad sector because of the raid 5
nature and the arrays show perfect health. I can read from the drive as
show by:
[root@sbackup ~]# dd if=/dev/sdc of=/dev/null
1744873+0 records in
1744872+0 records out
893374464 bytes (893 MB) copied, 29.2183 seconds, 30.6 MB/s
Note: I did a ctrl C
Any ideas on how to repair?
thanks,
Dan
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-05-02 13:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-02 13:44 [linux-lvm] I/O errors on two disks Daniel Davidson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).