From: "Lee Gold" <leegold@operamail.com>
To: linux-lvm@redhat.com
Subject: [linux-lvm] LVM - Adding a Disk
Date: Thu, 02 Jun 2011 09:27:01 -0700 [thread overview]
Message-ID: <1307032021.3508.1458812517@webmail.messagingengine.com> (raw)
Hi,
I installed Ubuntu 10.04 Server using LVM during the install. This is a
intranet/home/personal server - it works well so far. I will run out of
space and want to add a hard drive. AFAIK I specifically need more space
in the web "document root" - in /var/www . I have 60 out of a 100 GB
hard disk devoted to that area right now and I continue to load video
and audio files under /var/www - it will fill up.
I stand ready to provide any info needed. I think I can fill in the
details from the manual...
But generally speaking what should I do?
Below I'm taking a stab at what info is needed. Thanks:
$ sudo fdisk -l
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x69add380
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 194560 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 25 12162 97489920 8e Linux LVM
$ sudo parted /dev/sda print
Model: ATA WDC WD1000JB-00C (scsi)
Disk /dev/sda: 100GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 200MB 199MB primary ext2 boot
2 200MB 100GB 99.8GB primary lvm
$ sudo lvm version
LVM version: 2.02.54(1) (2009-10-26)
Library version: 1.02.39 (2009-10-26)
Driver version: 4.15.0
$ sudo vgdisplay
--- Volume group ---
VG Name system
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 5
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 4
Open LV 4
Max PV 0
Cur PV 1
Act PV 1
VG Size 92.97 GiB
PE Size 4.00 MiB
Total PE 23801
Alloc PE / Size 23801 / 92.97 GiB
Free PE / Size 0 / 0
VG UUID vvUrmr-sP9W-H5me-Axol-5pYk-4Cit-AoqwjV
$ sudo lvdisplay
--- Logical volume ---
LV Name /dev/system/root
VG Name system
LV UUID 8T4l84-UzUn-poOl-CUuc-flj4-JHwd-rWaARc
LV Write Access read/write
LV Status available
# open 1
LV Size 18.62 GiB
Current LE 4768
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 251:0
--- Logical volume ---
LV Name /dev/system/var
VG Name system
LV UUID 7wVbH1-vHGU-b719-BPyd-gM0i-4eV6-i4PvY3
LV Write Access read/write
LV Status available
# open 2
LV Size 60.54 GiB
Current LE 15497
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 251:1
--- Logical volume ---
LV Name /dev/system/home
VG Name system
LV UUID rzMoJJ-EGnB-3lDG-LJZP-SFKP-AAui-YzwlZP
LV Write Access read/write
LV Status available
# open 2
LV Size 11.02 GiB
Current LE 2820
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 251:2
--- Logical volume ---
LV Name /dev/system/swap
VG Name system
LV UUID 91ohFo-KzaI-T5bQ-dVne-HZxT-dfON-M49JL2
LV Write Access read/write
LV Status available
# open 1
LV Size 2.80 GiB
Current LE 716
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 251:3
$ df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/system-root
ext3 19G 1010M 17G 6% /
none devtmpfs 497M 228K 497M 1% /dev
none tmpfs 501M 0 501M 0% /dev/shm
none tmpfs 501M 36K 501M 1% /var/run
none tmpfs 501M 0 501M 0% /var/lock
none tmpfs 501M 0 501M 0% /lib/init/rw
/dev/sda1 ext2 179M 31M 138M 19% /boot
/dev/mapper/system-home
reiserfs 12G 44M 11G 1% /home
/dev/mapper/system-var
reiserfs 61G 19G 43G 31% /var
----end of post----Thanks.
--
http://www.fastmail.fm - Choose from over 50 domains or use your own
next reply other threads:[~2011-06-02 16:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-02 16:27 Lee Gold [this message]
2011-06-02 16:46 ` [linux-lvm] LVM - Adding a Disk Ray Morris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1307032021.3508.1458812517@webmail.messagingengine.com \
--to=leegold@operamail.com \
--cc=linux-lvm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).