* [linux-lvm] if clvm based on rhcs? @ 2011-02-24 6:40 yue 2011-02-25 3:39 ` Alberto Rivera 2011-02-28 17:25 ` yue 0 siblings, 2 replies; 6+ messages in thread From: yue @ 2011-02-24 6:40 UTC (permalink / raw) To: linux-lvm [-- Attachment #1: Type: text/plain, Size: 91 bytes --] i use san , clvm based on san. if i have to install rhcs ,if i want to use clvm? thanks. [-- Attachment #2: Type: text/html, Size: 226 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-lvm] if clvm based on rhcs? 2011-02-24 6:40 [linux-lvm] if clvm based on rhcs? yue @ 2011-02-25 3:39 ` Alberto Rivera 2011-02-28 17:25 ` yue 1 sibling, 0 replies; 6+ messages in thread From: Alberto Rivera @ 2011-02-25 3:39 UTC (permalink / raw) To: LVM general discussion and development; +Cc: yue [-- Attachment #1: Type: text/plain, Size: 607 bytes --] 2011/2/24 yue <ooolinux@163.com> > i use san , clvm based on san. > if i have to install rhcs ,if i want to use clvm? > > thanks. > > Hello, Can you be a bit more specific with your request ? Are asking how to you use clvm in RHCS ? Whether you are using san, or any other method of external storage, you require to have the lvm2-cluster rpms in order to be able to use clvm with RHCS. _______________________________________________ > linux-lvm mailing list > linux-lvm@redhat.com > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ > [-- Attachment #2: Type: text/html, Size: 1279 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-lvm] if clvm based on rhcs? 2011-02-24 6:40 [linux-lvm] if clvm based on rhcs? yue 2011-02-25 3:39 ` Alberto Rivera @ 2011-02-28 17:25 ` yue 2011-03-01 4:51 ` Sunil_Gupta2 2011-03-01 16:56 ` yue 1 sibling, 2 replies; 6+ messages in thread From: yue @ 2011-02-28 17:25 UTC (permalink / raw) To: Alberto Rivera; +Cc: LVM general discussion and development [-- Attachment #1: Type: text/plain, Size: 1017 bytes --] 1.my storage base on fc-san. i have to use a dfs with cluster-sense,i am testing gfs2. in order to resize storage space, i want to use clvm + gfs2. i want to know if it is required to install redhat cluser,cluster-storage ? and create a cluster? 2.my kernel 2.6.32, fc12, cman-3.0.17 i find no cman.ko,if it do not need cman.ko anymore? thanks. At 2011-02-25 11:39:18，"Alberto Rivera" <pollochicken@gmail.com> wrote: 2011/2/24 yue<ooolinux@163.com> i use san , clvm based on san. if i have to install rhcs ,if i want to use clvm? thanks. Hello, Can you be a bit more specific with your request ? Are asking how to you use clvm in RHCS ? Whether you are using san, or any other method of external storage, you require to have the lvm2-cluster rpms in order to be able to use clvm with RHCS. _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO athttp://tldp.org/HOWTO/LVM-HOWTO/ [-- Attachment #2: Type: text/html, Size: 2090 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-lvm] if clvm based on rhcs? 2011-02-28 17:25 ` yue @ 2011-03-01 4:51 ` Sunil_Gupta2 2011-03-01 16:56 ` yue 1 sibling, 0 replies; 6+ messages in thread From: Sunil_Gupta2 @ 2011-03-01 4:51 UTC (permalink / raw) To: linux-lvm, pollochicken [-- Attachment #1: Type: text/plain, Size: 1657 bytes --] For gfs2 to be used it is good to use with the cluster but not necessarily check the release notes but if clvmd is used then cluster is necessary . Cman is no more a kernel module but cman is the primary service which must be running to set up the cluster. --Sunil From: linux-lvm-bounces@redhat.com [mailto:linux-lvm-bounces@redhat.com] On Behalf Of yue Sent: Monday, February 28, 2011 10:56 PM To: Alberto Rivera Cc: LVM general discussion and development Subject: Re: [linux-lvm] if clvm based on rhcs? 1.my storage base on fc-san. i have to use a dfs with cluster-sense,i am testing gfs2. in order to resize storage space, i want to use clvm + gfs2. i want to know if it is required to install redhat cluser,cluster-storage ? and create a cluster? 2.my kernel 2.6.32, fc12, cman-3.0.17 i find no cman.ko,if it do not need cman.ko anymore? thanks. At 2011-02-25 11:39:18，"Alberto Rivera" <pollochicken@gmail.com<mailto:pollochicken@gmail.com>> wrote: 2011/2/24 yue <ooolinux@163.com<mailto:ooolinux@163.com>> i use san , clvm based on san. if i have to install rhcs ,if i want to use clvm? thanks. Hello, Can you be a bit more specific with your request ? Are asking how to you use clvm in RHCS ? Whether you are using san, or any other method of external storage, you require to have the lvm2-cluster rpms in order to be able to use clvm with RHCS. _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com<mailto:linux-lvm@redhat.com> https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ [-- Attachment #2: Type: text/html, Size: 5803 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-lvm] if clvm based on rhcs? 2011-02-28 17:25 ` yue 2011-03-01 4:51 ` Sunil_Gupta2 @ 2011-03-01 16:56 ` yue 2011-03-02 13:59 ` Sunil_Gupta2 1 sibling, 1 reply; 6+ messages in thread From: yue @ 2011-03-01 16:56 UTC (permalink / raw) To: LVM general discussion and development; +Cc: pollochicken [-- Attachment #1: Type: text/plain, Size: 2148 bytes --] 1.there is few documents about cluster3,includehttp://sources.redhat.com/cluster/wiki/ do you know some where? now i do not know what is redhat cluster? 2.gfs2 need /etc/cluster/cluster.conf,and express membership. but clvm seem do not have a cluster conf?? so what to make sure nodes are clvm cluster number? i guess gfs2,clvm,need a cluster conf to conform membership? 3.if there can be more than 1 cluster in cluster.conf? for example ,a cluster for gfs2, another for clvm cluster? 4 if i am boring ,forgive me if so. thanks. At 2011-03-01 12:51:48，Sunil_Gupta2@dell.com wrote: For gfs2 to be used it is good to use with the cluster but not necessarily check the release notes but if clvmd is used then cluster is necessary . Cman is no more a kernel module but cman is the primary service which must be running to set up the cluster. --Sunil From:linux-lvm-bounces@redhat.com [mailto:linux-lvm-bounces@redhat.com]On Behalf Ofyue Sent: Monday, February 28, 2011 10:56 PM To: Alberto Rivera Cc: LVM general discussion and development Subject: Re: [linux-lvm] if clvm based on rhcs? 1.my storage base on fc-san. i have to use a dfs with cluster-sense,i am testing gfs2. in order to resize storage space, i want to use clvm + gfs2. i want to know if it is required to install redhat cluser,cluster-storage ? and create a cluster? 2.my kernel 2.6.32, fc12, cman-3.0.17 i find no cman.ko,if it do not need cman.ko anymore? thanks. At 2011-02-25 11:39:18，"Alberto Rivera" <pollochicken@gmail.com> wrote: 2011/2/24 yue <ooolinux@163.com> i use san , clvm based on san. if i have to install rhcs ,if i want to use clvm? thanks. Hello, Can you be a bit more specific with your request ? Are asking how to you use clvm in RHCS ? Whether you are using san, or any other method of external storage, you require to have the lvm2-cluster rpms in order to be able to use clvm with RHCS. _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO athttp://tldp.org/HOWTO/LVM-HOWTO/ [-- Attachment #2: Type: text/html, Size: 5440 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-lvm] if clvm based on rhcs? 2011-03-01 16:56 ` yue @ 2011-03-02 13:59 ` Sunil_Gupta2 0 siblings, 0 replies; 6+ messages in thread From: Sunil_Gupta2 @ 2011-03-02 13:59 UTC (permalink / raw) To: linux-lvm; +Cc: pollochicken [-- Attachment #1: Type: text/plain, Size: 3156 bytes --] This should help http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html-single/Cluster_Administration/index.html >>2.gfs2 need /etc/cluster/cluster.conf,and express membership. but clvm seem do not have a cluster conf?? so what to make sure nodes are clvm cluster number? If the cluster is setup and clvmd is running the VG created will be clustered VG that can be verified using vgs command and its options the attribute field will show ‘c’ which is for clustered VG…more Info is on vgs man page . --Sunil From: linux-lvm-bounces@redhat.com [mailto:linux-lvm-bounces@redhat.com] On Behalf Of yue Sent: Tuesday, March 01, 2011 10:26 PM To: LVM general discussion and development Cc: pollochicken@gmail.com Subject: Re: [linux-lvm] if clvm based on rhcs? 1.there is few documents about cluster3,include http://sources.redhat.com/cluster/wiki/ do you know some where? now i do not know what is redhat cluster? 2.gfs2 need /etc/cluster/cluster.conf,and express membership. but clvm seem do not have a cluster conf?? so what to make sure nodes are clvm cluster number? i guess gfs2,clvm,need a cluster conf to conform membership? 3.if there can be more than 1 cluster in cluster.conf? for example ,a cluster for gfs2, another for clvm cluster? 4 if i am boring ,forgive me if so. thanks. At 2011-03-01 12:51:48，Sunil_Gupta2@dell.com wrote: For gfs2 to be used it is good to use with the cluster but not necessarily check the release notes but if clvmd is used then cluster is necessary . Cman is no more a kernel module but cman is the primary service which must be running to set up the cluster. --Sunil From: linux-lvm-bounces@redhat.com<mailto:linux-lvm-bounces@redhat.com> [mailto:linux-lvm-bounces@redhat.com<mailto:linux-lvm-bounces@redhat.com>] On Behalf Of yue Sent: Monday, February 28, 2011 10:56 PM To: Alberto Rivera Cc: LVM general discussion and development Subject: Re: [linux-lvm] if clvm based on rhcs? 1.my storage base on fc-san. i have to use a dfs with cluster-sense,i am testing gfs2. in order to resize storage space, i want to use clvm + gfs2. i want to know if it is required to install redhat cluser,cluster-storage ? and create a cluster? 2.my kernel 2.6.32, fc12, cman-3.0.17 i find no cman.ko,if it do not need cman.ko anymore? thanks. At 2011-02-25 11:39:18，"Alberto Rivera" <pollochicken@gmail.com<mailto:pollochicken@gmail.com>> wrote: 2011/2/24 yue <ooolinux@163.com<mailto:ooolinux@163.com>> i use san , clvm based on san. if i have to install rhcs ,if i want to use clvm? thanks. Hello, Can you be a bit more specific with your request ? Are asking how to you use clvm in RHCS ? Whether you are using san, or any other method of external storage, you require to have the lvm2-cluster rpms in order to be able to use clvm with RHCS. _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com<mailto:linux-lvm@redhat.com> https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ [-- Attachment #2: Type: text/html, Size: 11562 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-03-02 13:59 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-02-24 6:40 [linux-lvm] if clvm based on rhcs? yue 2011-02-25 3:39 ` Alberto Rivera 2011-02-28 17:25 ` yue 2011-03-01 4:51 ` Sunil_Gupta2 2011-03-01 16:56 ` yue 2011-03-02 13:59 ` Sunil_Gupta2
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).