From: Heinz J. Mauelshagen <Heinz.Mauelshagen@t-online.de>
To: Les Hazelton <seawolf@attglobal.net>
Cc: linux-lvm@msede.com
Subject: Re: [linux-lvm] need help to recover my system
Date: Sun, 1 Oct 2000 10:01:51 +0000 [thread overview]
Message-ID: <20001001100151.A3571@srv.t-online.de> (raw)
In-Reply-To: <39D6A94C.3C40B982@attglobal.net>; from seawolf@attglobal.net on Sat, Sep 30, 2000 at 11:02:36PM -0400
On Sat, Sep 30, 2000 at 11:02:36PM -0400, Les Hazelton wrote:
> I had a Mandrake 7.1 system running the 2.2.17 kernel with LVM and
> reiserfs patches applied. I have a 15Gb partition on /dev/hdc5 which
> was one large PV. It supports one VG which has the logical volumes for
> /usr, /home, /var, etc... Everything except /boot and / which were on
> the hda drive as plain ext2 file systems.
>
> I decided to move the root partition "/" to a logical volume on hdc5 and
> all was going well until I deleted it from the ext2 system on hda6.
How did you do that?
Did you create an inital ram disk to load the lvm driver and activate
the volume group?
Otherwise you can't access your volume group(s) anyway from the /boot
booted kernel.
> So
> now I have a perfectly good Linux system contained on the hdc5 PV which
> I can't access.
>
> I have test system (Mandrake 7.2-b) on the hda drive. It has the
> 2.4.0-0.22 kernel distributed my Mandrake and I have been attempting to
> recover using that system. The problem is I keep getting these errors:
>
> ------------------------------------------------------------------------------
> pvscan -- reading all physical volumes (this may take a while...)
> pvscan -- ERROR "pv_read_all_pv(): lvm_dir_cache" reading physical
> volumes
This error means, that no (compatible) entries could be found either
in /proc/partitions or, if /proc/partitions doesn't exist, in /dev.
Please check that these sources are valid on your Mandrake 7.2-b test system
and retry.
>
> [root@farpt1 /root]# vgscan -v
> vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d"
> vgscan -- reading all physical volumes (this may take a while...)
> vgscan -- no volume groups found
> -------------------------------------------------------------------------------
>
> I was going to try a pvcreate for /dev/hdc5 but thought it would wipe
> the partition clean and I don't want to start over if there is *any*
> hope of recovering it.
>
> Please, if anyone knows a way to recover this volume, I would be
> extremely grateful for the help.
>
> Les Hazelton
--
Regards,
Heinz -- The LVM guy --
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Bartningstr. 12
64289 Darmstadt
Germany
Mauelshagen@Sistina.com +49 6151 7103 86
FAX 7103 96
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2000-10-01 10:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-10-01 3:02 [linux-lvm] need help to recover my system Les Hazelton
2000-10-01 10:01 ` Heinz J. Mauelshagen [this message]
2000-10-01 15:42 ` Les Hazelton
2000-10-01 18:10 ` Heinz J. Mauelshagen
2000-10-01 22:54 ` Les Hazelton
2000-10-02 4:49 ` Andreas Dilger
2000-10-02 6:33 ` Les Hazelton
2000-10-02 10:26 ` Heinz J. Mauelshagen
2000-10-02 9:10 ` Les Hazelton
2000-10-02 14:58 ` Les Hazelton
2000-10-02 10:20 ` Heinz J. Mauelshagen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001001100151.A3571@srv.t-online.de \
--to=heinz.mauelshagen@t-online.de \
--cc=Mauelshagen@Sistina.com \
--cc=linux-lvm@msede.com \
--cc=seawolf@attglobal.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox