From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Thu, 4 Oct 2001 00:44:25 -0500
From: idsfa@visi.com
Subject: Re: [linux-lvm] What have I done!?
Message-ID: <20011004004425.B20463@mitethe.eudyptes>
References: <Pine.LNX.4.33.0110040141320.21655-100000@fogarty.jakma.org> <008a01c14c7f$de865e30$836788cf@industry>
Mime-Version: 1.0
Content-Disposition: inline
In-Reply-To: <008a01c14c7f$de865e30$836788cf@industry>; from jlixfeld@andromedas.com on Wed, Oct 03, 2001 at 10:54:21PM -0400
Sender: linux-lvm-admin@sistina.com
Errors-To: linux-lvm-admin@sistina.com
Reply-To: linux-lvm@sistina.com
List-Help: <mailto:linux-lvm-request@sistina.com?subject=help>
List-Post: <mailto:linux-lvm@sistina.com>
List-Subscribe: <http://lists.sistina.com/mailman/listinfo/linux-lvm>,
	<mailto:linux-lvm-request@sistina.com?subject=subscribe>
List-Unsubscribe: <http://lists.sistina.com/mailman/listinfo/linux-lvm>,
	<mailto:linux-lvm-request@sistina.com?subject=unsubscribe>
List-Archive: <http://lists.sistina.com/pipermail/linux-lvm/>
List-Id: <linux-lvm.redhat.com>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-lvm@sistina.com

On Wed, Oct 03, 2001 at 10:54:21PM -0400, Jason A. Lixfeld wrote:

> hdj: read_intr: error=0x04 { DriveStatusError }
> hdj: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hdj: read_intr: error=0x04 { DriveStatusError }
> hdj: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hdl: read_intr: error=0x04 { DriveStatusError }
> hdl: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hdl: read_intr: error=0x04 { DriveStatusError }
> hdl: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }

Those are IDE driver errors.  Judging from the drive devices, you
have quite a few ide controllers.  Did you compile in the drivers
for all of them?  Some of the cards (and even some on-board chipsets)
are NOT supported by default.  In particular, Promise & HiPoint
cards require special kernel compile time options.

What do you see in /proc/ide?

Note that if you compiled the drivers as modules, those modules
MUST be loaded BEFORE lvm is started.

  Michael Kellen
  $ fortune -m Kellen