From: "Heinz J . Mauelshagen" <mauelshagen@sistina.com>
To: linux-lvm@sistina.com
Subject: Re: [linux-lvm] Removing an old disk, and some vgexport/import love..
Date: Thu Sep 19 05:00:02 2002 [thread overview]
Message-ID: <20020919115935.A32578@sistina.com> (raw)
In-Reply-To: <002001c25fa7$482b2740$ccc67140@ownage>; from lightning@aci.net on Wed, Sep 18, 2002 at 11:39:19PM -0700
On Wed, Sep 18, 2002 at 11:39:19PM -0700, Matt wrote:
> Helu,
>
>
>
> I am in dire need of some help.I recently removed an old disk from my PV
> and added a new one
>
> in place of the old one.
>
> e.g.
>
>
>
> pvmove garage /dev/hdj1 /dev/hde1 (hde1 being the new drive)
>
>
>
> The physical extents moved over to the new drive and everything was
> looking good until
>
> I made a pretty big mistake, I figured I'd need to export the group
> 'garage' and import it.
>
> Wrong! Now when I go and try to import my group it freaks stating:
>
>
>
> # vgimport garage /dev/hde1 /dev/hdg1 /dev/hdf1
>
> vgimport -- ERROR: wrong number of physical volumes to import volume
> group "garage"
Matt,
you didn't need to export the volume group unless you want to move it to
a different system. It looks like you exported the VG and removed /dev/hdj1,
right?
If that assumption is true, you still need /dev/hdj1 in order to get your
VG back.
Then do the following:
# vgimport garage /dev/hd[efgj]1
# vgchange -ay garage
# vgreduce garage /dev/hdj1
That should bring your VG back and reduce it by the empty /dev/hdj1
physical volume.
You can physically remove /dev/hdj1 afterwards if you want to.
Regards,
Heinz -- The LVM Guy --
>
>
>
> I can't do a vgcfgrestore either, because it is currently exported and I
> am not sure if that would
> fix anything anyways. Here is some more information:
>
>
>
> # pvscan
>
> pvscan -- reading all physical volumes (this may take a while...)
>
> pvscan -- inactive PV "/dev/hdg1" is in EXPORTED VG "garage" [74.55 GB
> / 0 free]
>
> pvscan -- inactive PV "/dev/hde1" is in EXPORTED VG "garage" [76.33 GB
> / 0 free]
>
> pvscan -- inactive PV "/dev/hdf1" is in EXPORTED VG "garage" [74.52 GB
> / 60.21 GB free]
>
> pvscan -- total: 3 [225.42 GB] / in use: 3 [225.42 GB] / in no VG: 0 [0]
>
>
>
> vgscan -d output can be found at:
> http://www.planetgarage.net/vgscan.txt (long)
>
>
>
> root@deify:~ # vgdisplay -Dv
>
> vgdisplay -- WARNING: volume group "garagePV_EXP" is exported
>
> --- Volume group ---
>
> VG Name garagePV_EXP
>
> VG Access read/write
>
> VG Status NOT available/exported/resizable
>
> VG # 0
>
> MAX LV 256
>
> Cur LV 1
>
> Open LV 0
>
> MAX LV Size 255.99 GB
>
> Max PV 256
>
> Cur PV 3
>
> Act PV 3
>
> VG Size 225.41 GB
>
> PE Size 4 MB
>
> Total PE 57705
>
> Alloc PE / Size 42290 / 165.20 GB
>
> Free PE / Size 15415 / 60.21 GB
>
> VG UUID fs8lXY-bca9-tFHT-yv8g-HP7U-Ssh7-v13m9h
>
>
>
> --- Logical volume ---
>
> LV Name /dev/garage/LLAMA
>
> VG Name garage
>
> LV Write Access read/write
>
> LV Status NOT available
>
> LV # 1
>
> # open 0
>
> LV Size 165.20 GB
>
> Current LE 42290
>
> Allocated LE 42290
>
> Allocation next free
>
> Read ahead sectors 120
>
> Block device 58:0
>
>
>
>
>
> --- Physical volumes ---
>
> PV Name (#) /dev/hde1 (1)
>
> PV Status available / allocatable
>
> Total PE / Free PE 19541 / 0
>
>
>
> PV Name (#) /dev/hdg1 (3)
>
> PV Status available / allocatable
>
> Total PE / Free PE 19086 / 0
>
>
>
> PV Name (#) /dev/hdf1 (4)
>
> PV Status available / allocatable
>
> Total PE / Free PE 19078 / 15415
>
>
>
>
>
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf
Germany
Mauelshagen@Sistina.com +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2002-09-19 5:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-19 1:39 [linux-lvm] Removing an old disk, and some vgexport/import love Matt
2002-09-19 5:00 ` Heinz J . Mauelshagen [this message]
2002-09-19 6:13 ` Matt
2002-09-19 8:48 ` Heinz J . Mauelshagen
2002-09-19 9:50 ` Christian Limpach
2002-09-19 16:46 ` Matt
2002-09-20 4:44 ` Heinz J . Mauelshagen
2002-09-20 5:23 ` Matt
2002-09-20 5:38 ` Heinz J . Mauelshagen
2002-09-20 6:07 ` Heinz J . Mauelshagen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020919115935.A32578@sistina.com \
--to=mauelshagen@sistina.com \
--cc=linux-lvm@sistina.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox