Linux LVM users
 help / color / mirror / Atom feed
From: Christophe Nowicki <cscm@meuh.dyndns.org>
To: LVM general discussion and development <linux-lvm@redhat.com>
Subject: Re: [linux-lvm] vgscan can not find active volume group when i add a cdrom
Date: Mon, 19 Jul 2004 00:27:32 +0200	[thread overview]
Message-ID: <20040718222732.GA4476@TuX> (raw)
In-Reply-To: <20040715124328.GJ25352@meuh.dyndns.org>

[-- Attachment #1: Type: text/plain, Size: 2407 bytes --]

Hi all,

I've solved my problem, I just switched cdrom possition. 
I put the CD-ROM as secondary master and the hard drive as secondary
slave. And now everything is working :

/* dmesg output */ 
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST3120026A, ATA DISK drive
hdb: ST3120026A, ATA DISK drive
blk: queue f0825120, I/O limit 4095Mb (mask 0xffffffff)
blk: queue f082525c, I/O limit 4095Mb (mask 0xffffffff)
hdc: Hewlett-Packard CD-Writer Plus 7500, ATAPI CD/DVD-ROM drive
hdd: ST3120022A, ATA DISK drive
blk: queue f08256b0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63,
UDMA(100)
hdb: attached ide-disk driver.
hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63,
UDMA(100)
hdd: attached ide-disk driver.
hdd: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63,
UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
 /dev/ide/host0/bus0/target1/lun0: p1
 /dev/ide/host0/bus1/target1/lun0: p1
Journalled Block Device driver loaded

/* vgscan output */ 

vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- creating empty "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- scanning for all active volume group(s) first
vgscan -- found active volume group "vg_hda"
vgscan -- reading data of volume group "vg_hda" from physical volume(s)
vgscan -- inserting "vg_hda" into lvmtab
vgscan -- backing up volume group "vg_hda"
vgscan -- checking volume group name "vg_hda"
vgscan -- checking volume group consistency of "vg_hda"
vgscan -- checking existence of "/etc/lvmtab.d"
[...]


Strange, it isn't it? I've a link between /dev/hdc and /dev/cdrom  
does it play a role?

Thanks
-- 
Nowicki Christophe                                  
EPITECH Promo 2006                                 
http://etudiant.epita.fr/~nowick_c/                 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

      parent reply	other threads:[~2004-07-18 22:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-07-15 12:43 [linux-lvm] vgscan can not find active volume group when i add a cdrom Christophe Nowicki
2004-07-15 21:27 ` bowmailtmp-lvm
2004-07-17 20:33   ` Christophe Nowicki
2004-07-18 22:27 ` Christophe Nowicki [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040718222732.GA4476@TuX \
    --to=cscm@meuh.dyndns.org \
    --cc=linux-lvm@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox