[linux-lvm] pvcreate and Volume Id

[linux-lvm] pvcreate and Volume Id

[Rodolpho]

[-- Attachment #1: Type: text/plain, Size: 569 bytes --]

      Hi All,

      I'm, for the first time, installing LVM1 on slackware 10.2, and I one
doubt.

 

      pvcreate sets the same Volume Id  for all hard drives?

 

      With a exemple:

 

      I have a server with 3 scsi hard drives: sda 32Gb, sdb 74Gb e sdc
74Gb. I created a Physical Volume with sdb and sdc, because sda will not be
an lvm, so:

 

      pvcreate /dev/sdb

      pvcarete /dev/sdc

 

      When I turn on the server, lilo says that the Volume Id is duplicated,
which is true, and I confirmed with lilo -T vol-ID.

 

 

Thanks, All

Rodolpho


[-- Attachment #2: Type: text/html, Size: 4562 bytes --]

[linux-lvm] pvcreate and Volume Id

[Rodolpho]

[-- Attachment #1: Type: text/plain, Size: 684 bytes --]

      Hi All,

      I'm, for the first time, configuring LVM1 on slackware 10.2, and I
have one doubt.

 

      pvcreate sets the same Volume Id  for all hard disks?

 

      With a exemple:

 

      I have a server with 3 scsi hard disks: sda 32Gb, sdb 74Gb e sdc 74Gb.
I created a Physical Volume with sdb and sdc, because sda will not be an
lvm, so:

 

      pvcreate /dev/sdb

      pvcarete /dev/sdc

 

      When I turn on the server, lilo says that the Volume Id is duplicated,
which is true, and I confirmed with lilo -T vol-ID.

 

            Is there something wrong with my configuration or should I look
for something to treat my lilo???

 

Thanks, All

Rodolpho


[-- Attachment #2: Type: text/html, Size: 4844 bytes --]