linux-lvm.redhat.com archive mirror
 help / color / mirror / Atom feed
From: paddy <paddy@panici.net>
To: linux-lvm@redhat.com
Subject: Re: [linux-lvm] LVM2 on hardware RAID
Date: Fri, 11 Aug 2006 18:24:53 +0100	[thread overview]
Message-ID: <20060811172450.GA12021@cobalt0.panici.net> (raw)
In-Reply-To: <73A8ABE78537AE4E9DB1D70863B8275F0330CD7C@exchange2k.lims.com>

On Fri, Aug 11, 2006 at 12:48:42PM -0400, Musil, William wrote:
> Hello all.
> 
> I have an issue, that I am not sure how to address.
> 
> How can I resize the physical volume if I change the geometry of the disk
> (non-destructive resize of RAID volume at the hardware level) 
> I can see that the OS has picked up the new size of the disk and I would like
> to resize the existing pv. I don't know how.
> 
> I started with a hardware raid 5 (400GB), linux automatically recognizes disk
> as /dev/sdb
> 
> a simplistic representation of the setup is as follows
> 
> pvcreate /dev/sdb
> vgcreate VolGroup10 /dev/sdb
> lvcreate -n LogVol10 VolGroup10
> mkfs.ext3 /dev/mapper/VolGroup10-LogVol10
> 
> I have added a disk and expand the array to 600GB I can still see every thing
> but I don't know how to extend the PV.
> 
> filesystems OK
> logical volumes OK
> volume groups OK
> 
> linux sees /dev/sdb as 600GB
> pvs shows pv /dev/sdb is 400GB. I wish to, non-destructively, reinitialize
> /dev/sdb so that pvs shows 600GB. how?

online or offline ?

I'm not aware of any tool that will resize your PV online.  I can't immediately
think that it would be hugely difficult, but it's a piece of work :-)

as for offline, you could do that in an afternoon with shell and dd :-)

Other possible strategies include, having partitioned your raid in the first
place (yes I know this is silly, but you can see what I mean), or perhaps
converting to some other VM software that can do what you need (like, will
EVMS do this??)  Perhaps there is a way to emulate the 'having partitioned
first strategy' and make the new 200G addressable as a seperate block
device, at which point a pvmerge command would come in handy :-)
(of course that would be easier if the PEs were PE size aligned to the
underlying device, but you could take account of that in where you 
started your new PV :-)

Or perhaps some kind soul will point you to something I have missed.

Good Luck.

Regards,
Paddy
-- 
Perl 6 will give you the big knob. -- Larry Wall

  reply	other threads:[~2006-08-11 17:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-08-11 16:48 [linux-lvm] LVM2 on hardware RAID Musil, William
2006-08-11 17:24 ` paddy [this message]
2006-08-11 19:26 ` Greg Hartzog
2006-08-14 20:55   ` paddy
  -- strict thread matches above, loose matches on Subject: below --
2006-08-11 19:37 Musil, William
2006-08-14 22:36 ` paddy
2006-08-14 22:57   ` Zak Kipling
2006-08-14 23:46     ` paddy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060811172450.GA12021@cobalt0.panici.net \
    --to=paddy@panici.net \
    --cc=linux-lvm@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).