From: Magnus Runesson <mr-lvm@linuxalert.org>
To: linux-lvm@sistina.com
Subject: Re: [linux-lvm] volume group not found????
Date: Wed, 01 Aug 2001 20:39:13 +0200 [thread overview]
Message-ID: <3B684CD1.1050209@linuxalert.org> (raw)
In-Reply-To: 00ac01c11a7f$9fac1bf0$0df1d981@piefke
It looks like you have hit the bug 193 in bugzilla.
/Magnus
Alexander Bruns wrote:
> Hi,
>
> I am new to this group an new to lvm. I reinstalled my personal server
> with redhat 7.1 an wanted to get lvm run over my three large discs.
>
> I had the following things running for a short while:
>
> - RedHat 7.1 with all updates.
> - self-compiled Kernel 2.4.6 with patched lvm 0.9.1_beta7
>
> On my first HD Igave the rest space to hda7 with fdisk and set the
> partition to "8e" lvm.
>
> The i followed the howto at sistina at:
> file://sistina.com/lvm/doc/lvm_howto/Common_tasks.html
>
>
> - I initalized the Partition:
> pvcreate /dev/hda7
>
> - I added the partition to a new volume group:
> vgcreate lvm_volume_01 /dev(hda7
>
> - then o activated the volume group:
> vgchange -a y lvm_volume_01
>
> - The I put a logical volume on the volume group:
> lvcrate -L50G -nlvm_lv_01 lvm_volume_01
>
> This logical Volume was then at /dev/lvm_volume_01/lvm_lv_01 and o
> formated it woith reiserfs an mounted it! Evething runs fine.
>
> I copied the old contents of hdb5 and hdc5 of the smaller HDs to this
> logical volume. on hda7.
>
>
>
> Then I added deleted the partition on hdc5, made a new one, set it to
> 8e an added it to the volume group as explained at:
> file://sistina.com/lvm/doc/lvm_howto/Common_tasks.html
>
>
> pvcreate /dev/hdc5
> vgextend lvm_volume_01
> lvextend -L30G /dev/lvm_volume_01/lvm_lv_01
> resize_reiserfs -f /dev/lvm_volume_01/lvm_lv_01
>
> That was all fine and i could mount the lvm_lv_01 without any
> problems.
>
>
> The same I then wanted to manage with the thirt HD at hdb5, but then
> something went wrong??
>
> Resize reiserfs did something but when i wanted to mount the LV it did
> not work. reiserfs-checks did not found a problem but the mount-binary
> told my something about a superblock......
>
>
> Abter a reboot I now have the following:
>
> [root@holodeck lvmconf]# pvdisplay /dev/hda7
> pvdisplay
> --- Physical volume ---
> PV Name /dev/hda7
> VG Name lvm_volume_01
> PV Size 48.54 GB / NOT usable 1.06 MB [LVM: 169 KB]
> PV# 1
> PV Status available
> Allocatable yes (but full)
> Cur LV 1
> PE Size (KByte) 4096
> Total PE 12425
> Free PE 0
> Allocated PE 12425
> PV UUID cFFBJX-aqxr-P7kU-71OY-pgpX-rvtA-XxVpoc
>
> But for /dev/hdb5 and /ev/hdc5 it does not show the same. NOTHING!!
>
>
>
> And becouse I did not write anything to the volumegroup or logical
> volume after the added two partition al my data must still be on hda7.
> But how do I manage to get on it?
>
> The following commands say the folling:
> #####################################################
>
>
>
> [root@holodeck lvmconf]# vgscan
> vgscan
> vgscan -- reading all physical volumes (this may take a while...)
> vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
> vgscan -- WARNING: This program does not do a VGDA backup of your
> volume group
>
> lvm_volume_01 is not found
>
> [root@holodeck lvmconf]# vgchange -a y lvm_volume_01
> vgchange
> vgchange -- volume group "lvm_volume_01" does not exist
>
>
>
> [root@holodeck lvmconf]# ls -al /dev/lvm*
> crw-r----- 1 root root 109, 0 Jul 20 16:39 /dev/lvm
>
> /dev/lvm_volume_01:
> insgesamt 88
> dr-xr-xr-x 2 root root 4096 Jul 20 23:06 .
> drwxr-xr-x 15 root root 81920 Jul 28 13:12 ..
> crw-r----- 1 root disk 109, 0 Jul 20 23:02 group
> brw-rw---- 1 root disk 58, 0 Jul 20 23:06 lvm_lv_01
>
>
> [root@holodeck lvmconf]# ls -al /dev/lvm_volume_01/
> insgesamt 88
> dr-xr-xr-x 2 root root 4096 Jul 20 23:06 .
> drwxr-xr-x 15 root root 81920 Jul 28 13:12 ..
> crw-r----- 1 root disk 109, 0 Jul 20 23:02 group
> brw-rw---- 1 root disk 58, 0 Jul 20 23:06 lvm_lv_01
>
>
>
>
> SHIT!
>
> How do I get on my Data at lvm_volume_01 bzw lvm_lv_01.
> lvm_lv_01 was formated with reiserfs
>
>
>
> Greetings from Germany from Alex
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
>
>
next prev parent reply other threads:[~2001-08-01 18:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-01 11:46 [linux-lvm] volume group not found???? Alexander Bruns
2001-08-01 18:39 ` Magnus Runesson [this message]
2001-08-13 1:26 ` Alexander Bruns
2001-08-13 1:42 ` Christopher Blunck
-- strict thread matches above, loose matches on Subject: below --
2001-09-21 3:06 tim
2001-09-21 3:58 [linux-lvm] Volume " tim
2001-09-24 11:18 ` Heinz J . Mauelshagen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B684CD1.1050209@linuxalert.org \
--to=mr-lvm@linuxalert.org \
--cc=linux-lvm@sistina.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox