From: Alberto <beto@kasenna.com>
To: Linux-LVM@sistina.com
Cc: "innocent@kasenna.com" <innocent@kasenna.com>
Subject: [linux-lvm] help using LVM & md for RAID10
Date: Sat May 10 08:37:05 2003 [thread overview]
Message-ID: <3EB07551.87856170@kasenna.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 7120 bytes --]
Hi,
I'm trying to use LVM together with md. I know you guys don't
recommend this combination, but I need it to get good performance
from our disks plus some protection. This combination used to work
with 0.3, but stop working with the new 1.0.7. I think the problem is
that after rebooting LVM has problem figuring out that it needs to use
md0-3 and not their corresponding part (/dev/sd?).
Have you done this before?
I'm adding the series of commands we used to create the volume, plus
the status after we reboot the machine.
CREATING THE VOLUME
# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid5] [multipath]
read_ahead 1024 sectors
md4 : active raid0 md3[3] md2[2] md1[1] md0[0]
143372288 blocks 512k chunks
md3 : active raid1 sdi[1] sdh[0]
35843584 blocks [2/2] [UU]
md2 : active raid1 sdg[1] sdf[0]
35843584 blocks [2/2] [UU]
md1 : active raid1 sde[1] sdd[0]
35843584 blocks [2/2] [UU]
md0 : active raid1 sdc[1] sdb[0]
35843584 blocks [2/2] [UU]
unused devices: <none>
#dd bs=256k if=/dev/zero of=/dev/md0 count=1000
#dd bs=256k if=/dev/zero of=/dev/md1 count=1000
#dd bs=256k if=/dev/zero of=/dev/md2 count=1000
#dd bs=256k if=/dev/zero of=/dev/md3 count=1000
# pvcreate /dev/md0
pvcreate -- physical volume "/dev/md0" successfully created
# pvcreate /dev/md1
pvcreate -- physical volume "/dev/md1" successfully created
# pvcreate /dev/md2
pvcreate -- physical volume "/dev/md2" successfully created
# pvcreate /dev/md3
pvcreate -- physical volume "/dev/md3" successfully created
# vgcreate vg01 /dev/md[0-3]
vgcreate -- INFO: using default physical extent size 32 MB
vgcreate -- INFO: maximum logical volume size is 2 Terabyte
vgcreate -- doing automatic backup of volume group "vg01"
vgcreate -- volume group "vg01" successfully created and activated
# pvscan
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- ACTIVE PV "/dev/md0" of VG "vg01" [34.12 GB / 34.12 GB free]
pvscan -- ACTIVE PV "/dev/md1" of VG "vg01" [34.12 GB / 34.12 GB free]
pvscan -- ACTIVE PV "/dev/md2" of VG "vg01" [34.12 GB / 34.12 GB free]
pvscan -- ACTIVE PV "/dev/md3" of VG "vg01" [34.12 GB / 34.12 GB free]
pvscan -- inactive PV "/dev/md4" of VG "vg01" [34.12 GB / 34.12 GB free]
pvscan -- WARNING: physical volume "/dev/sdb" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdc" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdd" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sde" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdf" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdg" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdh" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdi" belongs to a meta device
pvscan -- total: 13 [170.92 GB] / in use: 13 [170.92 GB] / in no VG: 0
[0]
#lvcreate -i 4 -I 512 -L 130G -n lv01 vg01
lvcreate -- doing automatic backup of "vg01"
lvcreate -- logical volume "/dev/vg01/lv01" successfully created
# vgdisplay -v
--- Volume group ---
VG Name vg01
VG Access read/write
VG Status available/resizable
VG # 0
MAX LV 256
Cur LV 1
Open LV 0
MAX LV Size 2 TB
Max PV 256
Cur PV 4
Act PV 4
VG Size 136.50 GB
PE Size 32 MB
Total PE 4368
Alloc PE / Size 4160 / 130 GB
Free PE / Size 208 / 6.50 GB
VG UUID tXh4cm-QVz6-bT6a-yLRl-PnHc-cY16-72aPfp
--- Logical volume ---
LV Name /dev/vg01/lv01
VG Name vg01
LV Write Access read/write
LV Status available
LV # 1
# open 0
LV Size 130 GB
Current LE 4160
Allocated LE 4160
Stripes 4
Stripe size (KByte) 512
Allocation next free
Read ahead sectors 1024
Block device 58:0
--- Physical volumes ---
PV Name (#) /dev/md0 (1)
PV Status available / allocatable
Total PE / Free PE 1092 / 52
PV Name (#) /dev/md1 (2)
PV Status available / allocatable
Total PE / Free PE 1092 / 52
PV Name (#) /dev/md2 (3)
PV Status available / allocatable
Total PE / Free PE 1092 / 52
PV Name (#) /dev/md3 (4)
PV Status available / allocatable
Total PE / Free PE 1092 / 52
AFTER REBOOT
# pvscan
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- inactive PV "/dev/md0" of VG "vg01" [34.12 GB / 1.62 GB free]
pvscan -- inactive PV "/dev/md1" of VG "vg01" [34.12 GB / 1.62 GB free]
pvscan -- inactive PV "/dev/md2" of VG "vg01" [34.12 GB / 1.62 GB free]
pvscan -- inactive PV "/dev/md3" of VG "vg01" [34.12 GB / 1.62 GB free]
pvscan -- inactive PV "/dev/md4" of VG "vg01" [34.12 GB / 1.62 GB free]
pvscan -- WARNING: physical volume "/dev/sdb" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdc" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdd" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sde" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdf" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdg" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdh" belongs to a meta device
pvscan -- WARNING: physical volume "/dev/sdi" belongs to a meta device
pvscan -- total: 13 [170.92 GB] / in use: 13 [170.92 GB] / in no VG: 0
[0]
[root@sculpin root]# vgdisplay -v
--- Volume group ---
VG Name vg01
VG Access read/write
VG Status available/resizable
VG # 0
MAX LV 256
Cur LV 1
Open LV 0
MAX LV Size 2 TB
Max PV 256
Cur PV 4
Act PV 4
VG Size 136.50 GB
PE Size 32 MB
Total PE 4368
Alloc PE / Size 4160 / 130 GB
Free PE / Size 208 / 6.50 GB
VG UUID tXh4cm-QVz6-bT6a-yLRl-PnHc-cY16-72aPfp
--- Logical volume ---
LV Name /dev/vg01/lv01
VG Name vg01
LV Write Access read/write
LV Status available
LV # 1
# open 0
LV Size 130 GB
Current LE 4160
Allocated LE 4160
Stripes 4
Stripe size (KByte) 512
Allocation next free
Read ahead sectors 1024
Block device 58:0
--- Physical volumes ---
PV Name (#) /dev/sdc (1)
PV Status available / allocatable
Total PE / Free PE 1092 / 52
PV Name (#) /dev/sde (2)
PV Status available / allocatable
Total PE / Free PE 1092 / 52
PV Name (#) /dev/sdg (3)
PV Status available / allocatable
Total PE / Free PE 1092 / 52
PV Name (#) /dev/sdi (4)
PV Status available / allocatable
Total PE / Free PE 1092 / 52
[-- Attachment #2: Type: text/html, Size: 12974 bytes --]
next reply other threads:[~2003-05-10 8:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-10 8:37 Alberto [this message]
2003-05-10 12:56 ` [linux-lvm] help using LVM & md for RAID10 Jose Luis Domingo Lopez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EB07551.87856170@kasenna.com \
--to=beto@kasenna.com \
--cc=Linux-LVM@sistina.com \
--cc=innocent@kasenna.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox