Linux LVM users
 help / color / mirror / Atom feed
From: Duane Evenson <devenson@shaw.ca>
To: linux-lvm@sistina.com
Subject: [linux-lvm] vgcfgrestore -- can't restore part of active volume group "vg01"
Date: Tue May  6 20:12:02 2003	[thread overview]
Message-ID: <3EB85E55.3010202@shaw.ca> (raw)
In-Reply-To: 3EAF28A8.5010107@shaw.ca

I'm getting the above error:
vgcfgrestore -- can't restore part of active volume group "vg01"
I'm trying to restore the volume group as vgscan returns:
# vgscan
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- found active volume group "vg01"
vgscan -- ERROR "vg_read_with_pv_and_lv(): current PV" can't get data of 
volume
group "vg01" from physical volume(s)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume 
group

What's the problem?


vgcfgrestore -d -n vg01 /dev/hde
results in the last few lines being:

<4444> lvm_check_chars -- CALLED with name: "vg01"
<4444> lvm_check_chars -- LEAVING with ret: 0
<333> vg_check_name -- LEAVING with ret: 0
<22> vg_status -- LEAVING with ret: 0
<1> vg_check_active -- LEAVING with ret: 1
vgcfgrestore -- can't restore part of active volume group "vg01"


Here are the results of "vgdisplay -v;pvscan;lvmdiskscan" and "pvdata 
-PP /dev/hde"

vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please 
run vgscan

pvscan -- reading all physical volumes (this may take a while...)
pvscan -- ACTIVE   PV "/dev/hde"  is associated to unknown VG "vg01" 
(run vgscan)
pvscan -- total: 1 [111.79 GB] / in use: 1 [111.79 GB] / in no VG: 0 [0]

lvmdiskscan -- reading all disks / partitions (this may take a while...)
lvmdiskscan -- /dev/hde   [     111.79 GB] USED LVM whole disk
lvmdiskscan -- /dev/hda1  [      57.25 GB] Primary  LINUX native 
partition [0x83]
lvmdiskscan -- /dev/hdb1  [      57.25 GB] Primary  LINUX native 
partition [0x83]
lvmdiskscan -- 3 disks
lvmdiskscan -- 1 whole disk
lvmdiskscan -- 0 loop devices
lvmdiskscan -- 0 multiple devices
lvmdiskscan -- 0 network block devices
lvmdiskscan -- 2 partitions
lvmdiskscan -- 0 LVM physical volume partitions


--- Physical volume ---
PV Name               /dev/hde
VG Name               vg01
PV Size               111.79 GB [234441648 secs] / NOT usable 32.19 MB 
[LVM: 141 KB]
PV#                   1
PV Status             available
Allocatable           NO
Cur LV                0
PE Size (KByte)       32768
Total PE              3576
Free PE               3576
Allocated PE          0
PV UUID               XAAlct-wQKl-764B-10Yt-N2UK-o9Ss-5fffgF
pv_dev                   0:33
system_id                dave1052256028
pv_on_disk.base          0
pv_on_disk.size          1024
vg_on_disk.base          4096
vg_on_disk.size          4096
pv_uuidlist_on_disk.base 8192
pv_uuidlist_on_disk.size 32896
lv_on_disk.base          45056
lv_on_disk.size          84296
pe_on_disk.base          131072
pe_on_disk.size          33619968

      parent reply	other threads:[~2003-05-06 20:12 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-04-27 13:17 [linux-lvm] vgscan segmentation faults, VG name problems Duane Evenson
2003-04-28  4:03 ` Heinz J . Mauelshagen
2003-04-29 20:34   ` [linux-lvm] vgscan problem (was vgscan segmentation faults, VG name problems) Duane Evenson
2003-04-30  6:11     ` Heinz J . Mauelshagen
2003-04-30 21:12       ` Duane Evenson
2003-05-02 22:29         ` [linux-lvm] vgscan problem Duane Evenson
2003-05-06 20:12     ` Duane Evenson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3EB85E55.3010202@shaw.ca \
    --to=devenson@shaw.ca \
    --cc=linux-lvm@sistina.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox