Linux LVM users
 help / color / mirror / Atom feed
From: Howard Clifford <howardclifford@cablespeed.com>
To: linux-lvm@sistina.com
Subject: [linux-lvm] performance writing to an lv with no file system
Date: Mon Jun 30 21:22:01 2003	[thread overview]
Message-ID: <3F00F024.8050006@cablespeed.com> (raw)

Heinz,

Thank you for the response.

My logical volume is striped - 7 ways.

I am writing to the lv with a simple c program I wrote.

Each write is 7*stripesize, which in this case is 28 blocks.

Any thoughts on how I can get top speeds without mounting and unmounting 
  the volume?

Thanks,
Howie


 > Howard,

 > what's the LV layout (linear/striped ?).
 > How do you write to the LV (dd or soemthing).
 > What's the write pattern (sequential ? block size ?)

 > 80MB/sec raw sounds like you use a striped LV.


On Sun, Jun 29, 2003 at 12:08:34PM -0400, Howard Clifford wrote:
 > I built a 7 disk vg and put 1 lv on it.  I do not want to mount a file
 > system.
 > I just want to write directly to the disk device, /dev/vg1/vol1.
 >
 > My write performance has an odd behavior.
 > If after booting I write to the volume I get roughly 175MB/sec.
 > If after booting I do a mke2fs on the volume, mount it, umount it, then
 > write to the volume I get roughly 230 MB/sec.
 >
 > Any ideas?  How can I get top speed without first mounting then
 > umounting the volume?
 > By the way, I tried binding a raw device to the lv and got very bad
 > performance; around 80 MB/sec.  Would that be expected?
 >
 > (I'm using redhat 9.0 -> lvm-1.0.3-12)
 >
 > Thanks...
 >
 >
 > _______________________________________________
 > linux-lvm mailing list
 > linux-lvm@sistina.com
 > http://lists.sistina.com/mailman/listinfo/linux-lvm
 > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

-- 

Regards,
Heinz    -- The LVM Guy --

*** Software bugs are stupid.
     Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Sistina Software Inc.
Senior Consultant/Developer                       Am Sonnenhang 11
                                                   56242 Marienrachdorf
                                                   Germany
Mauelshagen@Sistina.com                           +49 2626 141200
                                                        FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

             reply	other threads:[~2003-06-30 21:22 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-06-30 21:22 Howard Clifford [this message]
2003-07-01  4:12 ` [linux-lvm] performance writing to an lv with no file system Heinz J . Mauelshagen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3F00F024.8050006@cablespeed.com \
    --to=howardclifford@cablespeed.com \
    --cc=linux-lvm@sistina.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox