From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3F329362.9040203@conterra.de> From: Dieter Stueken MIME-Version: 1.0 Subject: Re: [linux-lvm] PV Move References: <001d01c35d0a$971333a0$0d01a8c0@aphrodite> In-Reply-To: <001d01c35d0a$971333a0$0d01a8c0@aphrodite> Content-Transfer-Encoding: 8bit Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Thu Aug 7 13:00:02 2003 List-Id: Content-Type: text/plain; charset="utf-8"; format="flowed" To: linux-lvm@sistina.com Rupert Hair wrote: > So my question is really can I change where LVM is expecting to find a > PV? everywhere! just put the new disk on any free IDE port you have. Or use some temporary IDE pci-card. After you extracted the old disk from your lvm (don't forget the final vgremove), you may swap all disk around as you like. LVM will find them, regardless to which devices they are connected. This is one of the most impressive features of LVM anyway! May be hda can not be moved that easily because of the MBR to boot fom. But that has nothing to do with LVM. Dieter. -- Dieter St�ken, con terra GmbH, M�nster stueken@conterra.de http://www.conterra.de/ (0)251-7474-501