[linux-lvm] Problems(?) with pvresize

[linux-lvm] Problems(?) with pvresize

[Lars Michael Jogbäck]

Hi,

I've got a similar problem to the one reported earlier in June by Peter 
Daum.

I've got a hardware-raid5 that I've extended (/dev/sdk), and after 
extending it, I get the kernel to recognize the new size.
But pvresize is still using the old size. I'm pretty convinced that a 
reboot will solve this issue for me, but isn't there a way
of solving this without rebooting?

$ cat /sys/block/sdk/size
4882708480

# blockdev --getsz /dev/sdk
3906166784

# pvresize -v -d /dev/sdk
    Using physical volume(s) on command line
    Wiping cache of LVM-capable devices
    Archiving volume group "vg01" metadata (seqno 123).
    No change to size of physical volume /dev/sdk.
    Resizing volume "/dev/sdk" to 3906166400 sectors.
    Updating physical volume "/dev/sdk"
    Creating volume group backup "/etc/lvm/backup/vg01" (seqno 124).
  Physical volume "/dev/sdk" changed
  1 physical volume(s) resized / 0 physical volume(s) not resized

# lvm version
  LVM version:     2.02.07 (2006-07-17)
  Library version: 1.02.08 (2006-07-17)
  Driver version:  4.7.0

Best Regards,
/LM

Re: [linux-lvm] Problems(?) with pvresize

[Richard van den Berg]

Lars Michael Jogb�ck wrote:
> I've got a hardware-raid5 that I've extended (/dev/sdk), and after
> extending it, I get the kernel to recognize the new size.
> But pvresize is still using the old size. I'm pretty convinced that a
> reboot will solve this issue for me, but isn't there a way of solving
> this without rebooting?

I used "partprobe" that comes with parted, and it worked well for me.

Sincerely,

Richard van den Berg

Re: [linux-lvm] Problems(?) with pvresize

[Lars Michael Jogbäck]

Richard van den Berg wrote:
> Lars Michael Jogb�ck wrote:
>   
>> I've got a hardware-raid5 that I've extended (/dev/sdk), and after
>> extending it, I get the kernel to recognize the new size.
>> But pvresize is still using the old size. I'm pretty convinced that a
>> reboot will solve this issue for me, but isn't there a way of solving
>> this without rebooting?
>>     
>
> I used "partprobe" that comes with parted, and it worked well for me
>   
Thanks, but I've tried that and it didn't work either. pvresize still 
thinks it's the old size.

Best Regards,
/LM