From: Heinz Mauelshagen <heinzm@redhat.com>
To: LVM general discussion and development <linux-lvm@redhat.com>
Cc: ray@apollo.lv
Subject: Re: [linux-lvm] lvconvert -m 0 /dev/varlin/distfiles /dev/md0 => zero filled logical volume
Date: Thu, 17 Mar 2016 15:57:10 +0100 [thread overview]
Message-ID: <56EAC5C6.10301@redhat.com> (raw)
In-Reply-To: <56E9D1D2.8000403@apollo.lv>
On 03/16/2016 10:36 PM, Raimonds Cicans wrote:
> Hello.
>
> I am trying to move LVM setup from old RAID md0 to new RAID md1
>
> I did "lvconvert -m 1 /dev/path/to/logical_volume /dev/md1" on bunch
> of logical volumes.
> Everything went without problems.
>
> Then I tried to remove md0 from one of logical volumes by running
> command:
> lvconvert -m 0 /dev/varlin/distfiles /dev/md0
>
> I tried to mount this logical volume, but failed.
Please provide "lvs -a" and the output of the lvconvert commands to tell
better what failed here.
Did you check, that your new 2-legged mirror got convert to/from and
that it synced properly?
That said, this is a valid procedure beside using pvmove.
Can't tell what failed w/o further information.
Heinz
>
> Then I checked first megabyte of logical volume it was zero filled.
>
> Partial output of "lvs -o+devices":
> LV VG Attr LSize Pool Origin Data% Meta%
> Move Log Cpy%Sync Convert Devices
> backup varlin -wi-ao---- 100,00g
> /dev/md0(6304)
> backup varlin -wi-ao---- 100,00g
> /dev/md0(8544)
> data varlin -wi-ao---- 20,00g
> /dev/md0(28384)
> distfiles varlin -wi-a----- 20,00g
> /dev/md1(2738)
> ftp varlin rwi-aor--- 10,00g 100,00
> ftp_rimage_0(0),ftp_rimage_1(0)
> ftpdown varlin rwi-aor--- 10,00g 100,00
> ftpdown_rimage_0(0),ftpdown_rimage_1(0)
>
>
> lvm2: 2.02.116
> kernel: 4.4.2
>
>
> Questions:
>
> 1) What I did wrong?
> 2) Is it possible to salvage /dev/varlin/distfiles or I must restore
> it from backups?
> 3) What I should do now to get system to safe state?
>
>
> Best regards,
> Raimonds Cicans
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
prev parent reply other threads:[~2016-03-17 14:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-16 21:36 [linux-lvm] lvconvert -m 0 /dev/varlin/distfiles /dev/md0 => zero filled logical volume Raimonds Cicans
2016-03-16 22:00 ` Stuart Gathman
2016-03-16 22:56 ` Raimonds Cicans
2016-03-17 7:32 ` Raimonds Cicans
2016-03-20 17:41 ` Raimonds Cicans
2016-03-17 14:57 ` Heinz Mauelshagen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56EAC5C6.10301@redhat.com \
--to=heinzm@redhat.com \
--cc=linux-lvm@redhat.com \
--cc=ray@apollo.lv \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).