Linux LVM users
 help / color / mirror / Atom feed
From: "Fredrik Skog" <fredrik.skog@rodang.se>
To: LVM general discussion and development <linux-lvm@redhat.com>
Subject: [linux-lvm] Called while suspended
Date: Thu, 25 Mar 2010 13:54:39 +0100	[thread overview]
Message-ID: <BCCA5923972740C7A167865BABE25FDB@caramon> (raw)
In-Reply-To: 20100319222156.GE7345@redhat.com

Hi all,

I'm in the progress of switching a WD15EADS-00P8B0 disk to a  Samsung F2 
1.5TB drive because of all the reouble associated with the WD drives 
regarding 4kb block, system freeze and poor performance.

I unmounted the VG and began doing a pvmove.

At first it went well but after 30-40% done it began complaining big time.

**** snip****

 WARNING: dev_open(/dev/hdb2) called while suspended
  WARNING: dev_open(/dev/hdb3) called while suspended
  WARNING: dev_open(/dev/hdb4) called while suspended
  /dev/sdc1: Moved: 40.8%
  WARNING: dev_open(/dev/sdc1) called while suspended
  WARNING: dev_open(/dev/hda1) called while suspended
  WARNING: dev_open(/dev/hda2) called while suspended
  WARNING: dev_open(/dev/hda3) called while suspended
  WARNING: dev_open(/dev/hda4) called while suspended
  WARNING: dev_open(/dev/sdb1) called while suspended
  WARNING: dev_open(/dev/sdd1) called while suspended
  WARNING: dev_open(/dev/sde) called while suspended
  WARNING: dev_open(/dev/hdb1) called while suspended
  WARNING: dev_open(/dev/hdb2) called while suspended
  WARNING: dev_open(/dev/hdb3) called while suspended
  WARNING: dev_open(/dev/hdb4) called while suspended
  WARNING: dev_open(/dev/sdc1) called while suspended
  WARNING: dev_open(/dev/sdc1) called while suspended
  WARNING: dev_open(/dev/hda1) called while suspended
  WARNING: dev_open(/dev/hda2) called while suspended
  WARNING: dev_open(/dev/hda3) called while suspended
  WARNING: dev_open(/dev/hda4) called while suspended
  WARNING: dev_open(/dev/sdb1) called while suspended
  WARNING: dev_open(/dev/sdb1) called while suspended
  WARNING: dev_open(/dev/sdd1) called while suspended
  WARNING: dev_open(/dev/sde) called while suspended
  WARNING: dev_open(/dev/hdb1) called while suspended
  WARNING: dev_open(/dev/hdb2) called while suspended
  WARNING: dev_open(/dev/hdb3) called while suspended
  WARNING: dev_open(/dev/hdb4) called while suspended
  WARNING: dev_open(/dev/sdc1) called while suspended
  WARNING: dev_open(/dev/hda1) called while suspended
  WARNING: dev_open(/dev/hda2) called while suspended
  WARNING: dev_open(/dev/hda3) called while suspended
  WARNING: dev_open(/dev/hda4) called while suspended
  WARNING: dev_open(/dev/sdb1) called while suspended
  WARNING: dev_open(/dev/sdd1) called while suspended
  WARNING: dev_open(/dev/sde) called while suspended
  WARNING: dev_open(/dev/hdb1) called while suspended
  WARNING: dev_open(/dev/hdb2) called while suspended
  WARNING: dev_open(/dev/hdb3) called while suspended
  WARNING: dev_open(/dev/hdb4) called while suspended
  /dev/sdc1: Moved: 40.9%
  WARNING: dev_open(/dev/sdc1) called while suspended
  WARNING: dev_open(/dev/hda1) called while suspended
  WARNING: dev_open(/dev/hda2) called while suspended

**** snip***

What is happening here and should i be worried the data will be lost? I'm 
not very good at LVM so I'm very worried right now.

Thanks for any input on this

/Fredrik Skog

  parent reply	other threads:[~2010-03-25 12:54 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-19 18:13 [linux-lvm] Data alignment Phillip Susi
2010-03-19 18:36 ` Eugene Vilensky
2010-03-19 18:54   ` Phillip Susi
2010-03-19 19:54     ` Ray Morris
2010-03-19 21:20       ` Phillip Susi
2010-03-20  7:32     ` Luca Berra
2010-03-19 19:25 ` Mike Snitzer
2010-03-19 21:27   ` Phillip Susi
2010-03-19 22:21     ` Mike Snitzer
2010-03-19 23:11       ` Mike Snitzer
2010-03-25 12:54       ` Fredrik Skog [this message]
2010-03-20 23:02 ` Stuart D. Gathman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BCCA5923972740C7A167865BABE25FDB@caramon \
    --to=fredrik.skog@rodang.se \
    --cc=linux-lvm@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox