Re: [PATCH] m68k: Fix atarimouse init

[Petr Stehlik <pstehlik@sophics.cz>]

Andreas Schwab píše v Pá 02. 01. 2009 v 10:42 +0100:
> > Hi Geert,
> >
> >> The kernel says (ARAnyM, windowed mode):
> >> | Reseting weird mouse packet: 942, 379, 0
> >> | Reseting weird mouse packet: 943, 379, 0
> >> | Reseting weird mouse packet: 945, 378, 0
> >> | Reseting weird mouse packet: 948, 378, 0
> >> | Reseting weird mouse packet: 956, 376, 0
> 
> These messages come from ARAnyM.

..and indicates that something wrong is going on. Normally there is only
one such message when entering the ARAnyM window.
 
> ARAnyM's emulation of the IKBD does not support changing the y origin.

will add it there.

> >>   - the middle mouse button is dead
> >
> > As is expexcted - the original code was for a two-button mouse only. If Petr 
> > knows what the ikbd format for the third button is (on real hardware) it's easy 
> > to add that in.
> 
> The IKBD does not support more than two buttons.  For a three button
> mouse the middle button was apparently wired to the joystick port.

Yes, that was an old Linux-m68k extension.

What I meant by hardware supporting the mouse wheels was Eiffel: 
http://pagesperso-orange.fr/didierm/eiffel-e.htm

In about 3/4 of the long page there is a table labelled "Mouse elements"
that shows the mouse wheels and buttons scan codes. ARAnyM supports the
wheels (not sure about the buttons 3,4,5 - will check and add it there
eventually).

Petr


--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html