public inbox for linux-m68k@lists.linux-m68k.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: linux-m68k@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, aranym@lists.bobek.cz,
	Roman Zippel <zippel@linux-m68k.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH v2 3/4] m68k/atari: ARAnyM - Add support for console access
Date: Mon, 21 Feb 2011 20:29:59 +0100	[thread overview]
Message-ID: <1298316600-23094-3-git-send-email-geert@linux-m68k.org> (raw)
In-Reply-To: <1298316600-23094-1-git-send-email-geert@linux-m68k.org>

From: Roman Zippel <zippel@linux-m68k.org>

[geert: Cleanups and updates]

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Petr Stehlik <pstehlik@sophics.cz>

---
v2: No changes
v1:
  - early_param() does not exist in the modular case,
  - Break too long lines,
  - Make needlessly global functions static,
  - Use pr_*(),
  - Extract nfputs(), to avoid code duplication in nfcon_write() and
    nfcon_tty_write().

 arch/m68k/Kconfig       |    8 +++
 arch/m68k/emu/Makefile  |    1 +
 arch/m68k/emu/natfeat.c |   38 -----------
 arch/m68k/emu/nfcon.c   |  162 +++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 171 insertions(+), 38 deletions(-)
 create mode 100644 arch/m68k/emu/nfcon.c

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 2c890b5..6719c56 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -255,6 +255,14 @@ config NFBLOCK
 	  which allows direct access to the hard drives without using
 	  the hardware emulation.
 
+config NFCON
+	tristate "NatFeat console driver"
+	depends on NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat console driver
+	  which allows the console output to be redirected to the stderr
+	  output of ARAnyM.
+
 comment "Processor type"
 
 config M68020
diff --git a/arch/m68k/emu/Makefile b/arch/m68k/emu/Makefile
index fc4f77a..a83ef1e 100644
--- a/arch/m68k/emu/Makefile
+++ b/arch/m68k/emu/Makefile
@@ -5,3 +5,4 @@
 obj-y			+= natfeat.o
 
 obj-$(CONFIG_NFBLOCK)	+= nfblock.o
+obj-$(CONFIG_NFCON)	+= nfcon.o
diff --git a/arch/m68k/emu/natfeat.c b/arch/m68k/emu/natfeat.c
index 987d773..2291a7d 100644
--- a/arch/m68k/emu/natfeat.c
+++ b/arch/m68k/emu/natfeat.c
@@ -35,24 +35,6 @@ asm("\n"
 EXPORT_SYMBOL_GPL(nf_get_id);
 EXPORT_SYMBOL_GPL(nf_call);
 
-static int stderr_id;
-
-static void nf_write(struct console *co, const char *str, unsigned int count)
-{
-	char buf[68];
-
-	buf[64] = 0;
-	while (count > 64) {
-		memcpy(buf, str, 64);
-		nf_call(stderr_id, buf);
-		str += 64;
-		count -= 64;
-	}
-	memcpy(buf, str, count);
-	buf[count] = 0;
-	nf_call(stderr_id, buf);
-}
-
 void nfprint(const char *fmt, ...)
 {
 	static char buf[256];
@@ -65,26 +47,6 @@ void nfprint(const char *fmt, ...)
 	va_end(ap);
 }
 
-static struct console nf_console_driver = {
-	.name	= "debug",
-	.write	= nf_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-static int __init nf_debug_setup(char *arg)
-{
-	if (strcmp(arg, "emu"))
-		return 0;
-
-	stderr_id = nf_get_id("NF_STDERR");
-	if (stderr_id)
-		register_console(&nf_console_driver);
-	return 0;
-}
-
-early_param("debug", nf_debug_setup);
-
 static void nf_poweroff(void)
 {
 	long id = nf_get_id("NF_SHUTDOWN");
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
new file mode 100644
index 0000000..ab20dc0
--- /dev/null
+++ b/arch/m68k/emu/nfcon.c
@@ -0,0 +1,162 @@
+/*
+ * ARAnyM console driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+
+#include <asm/natfeat.h>
+
+static int stderr_id;
+static struct tty_driver *nfcon_tty_driver;
+
+static void nfputs(const char *str, unsigned int count)
+{
+	char buf[68];
+
+	buf[64] = 0;
+	while (count > 64) {
+		memcpy(buf, str, 64);
+		nf_call(stderr_id, buf);
+		str += 64;
+		count -= 64;
+	}
+	memcpy(buf, str, count);
+	buf[count] = 0;
+	nf_call(stderr_id, buf);
+}
+
+static void nfcon_write(struct console *con, const char *str,
+			unsigned int count)
+{
+	nfputs(str, count);
+}
+
+static struct tty_driver *nfcon_device(struct console *con, int *index)
+{
+	*index = 0;
+	return (con->flags & CON_ENABLED) ? nfcon_tty_driver : NULL;
+}
+
+static struct console nf_console = {
+	.name	= "nfcon",
+	.write	= nfcon_write,
+	.device	= nfcon_device,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+};
+
+
+static int nfcon_tty_open(struct tty_struct *tty, struct file *filp)
+{
+	return 0;
+}
+
+static void nfcon_tty_close(struct tty_struct *tty, struct file *filp)
+{
+}
+
+static int nfcon_tty_write(struct tty_struct *tty, const unsigned char *buf,
+			   int count)
+{
+	nfputs(buf, count);
+	return count;
+}
+
+static int nfcon_tty_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	char temp[2] = { ch, 0 };
+
+	nf_call(stderr_id, temp);
+	return 1;
+}
+
+static int nfcon_tty_write_room(struct tty_struct *tty)
+{
+	return 64;
+}
+
+static const struct tty_operations nfcon_tty_ops = {
+	.open		= nfcon_tty_open,
+	.close		= nfcon_tty_close,
+	.write		= nfcon_tty_write,
+	.put_char	= nfcon_tty_put_char,
+	.write_room	= nfcon_tty_write_room,
+};
+
+#ifndef MODULE
+
+static int __init nf_debug_setup(char *arg)
+{
+	if (strcmp(arg, "nfcon"))
+		return 0;
+
+	stderr_id = nf_get_id("NF_STDERR");
+	if (stderr_id) {
+		nf_console.flags |= CON_ENABLED;
+		register_console(&nf_console);
+	}
+
+	return 0;
+}
+
+early_param("debug", nf_debug_setup);
+
+#endif /* !MODULE */
+
+static int __init nfcon_init(void)
+{
+	int res;
+
+	stderr_id = nf_get_id("NF_STDERR");
+	if (!stderr_id)
+		return -ENODEV;
+
+	nfcon_tty_driver = alloc_tty_driver(1);
+	if (!nfcon_tty_driver)
+		return -ENOMEM;
+
+	nfcon_tty_driver->owner = THIS_MODULE;
+	nfcon_tty_driver->driver_name = "nfcon";
+	nfcon_tty_driver->name = "nfcon";
+	nfcon_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	nfcon_tty_driver->subtype = SYSTEM_TYPE_TTY;
+	nfcon_tty_driver->init_termios = tty_std_termios;
+	nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW;
+
+	tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops);
+	res = tty_register_driver(nfcon_tty_driver);
+	if (res) {
+		pr_err("failed to register nfcon tty driver\n");
+		put_tty_driver(nfcon_tty_driver);
+		return res;
+	}
+
+	if (!(nf_console.flags & CON_ENABLED))
+		register_console(&nf_console);
+
+	return 0;
+}
+
+static void __exit nfcon_exit(void)
+{
+	unregister_console(&nf_console);
+	tty_unregister_driver(nfcon_tty_driver);
+	put_tty_driver(nfcon_tty_driver);
+}
+
+module_init(nfcon_init);
+module_exit(nfcon_exit);
+
+MODULE_LICENSE("GPL");
-- 
1.7.0.4

  parent reply	other threads:[~2011-02-21 19:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-21 19:29 [PATCH v2 1/4] m68k/atari: Initial ARAnyM support Geert Uytterhoeven
2011-02-21 19:29 ` [PATCH v2 2/4] m68k/atari: ARAnyM - Add support for block access Geert Uytterhoeven
2011-02-21 19:29 ` Geert Uytterhoeven [this message]
2011-02-21 19:30 ` [PATCH v2 4/4] m68k/atari: ARAnyM - Add support for network access Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1298316600-23094-3-git-send-email-geert@linux-m68k.org \
    --to=geert@linux-m68k.org \
    --cc=aranym@lists.bobek.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@vger.kernel.org \
    --cc=zippel@linux-m68k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox