From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH] m68k: merge MMU and non-MMU versions of asm/hardirq.h
Date: Fri, 6 May 2011 10:20:03 +1000 [thread overview]
Message-ID: <1304641203-27994-1-git-send-email-gerg@snapgear.com> (raw)
From: Greg Ungerer <gerg@uclinux.org>
The contents of asm/hardirq.h are pretty strait forward for both the
MMU (hardirq_mm.h) and non-MMU (hardirq_no.h) include files. Merge the
two back into a single file.
Build and run tested on m68knommu targets, and ARAnyM Atari emulator.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/include/asm/hardirq.h | 35 ++++++++++++++++++++++++++++++++---
arch/m68k/include/asm/hardirq_mm.h | 16 ----------------
arch/m68k/include/asm/hardirq_no.h | 19 -------------------
arch/m68k/include/asm/irq.h | 9 ---------
4 files changed, 32 insertions(+), 47 deletions(-)
delete mode 100644 arch/m68k/include/asm/hardirq_mm.h
delete mode 100644 arch/m68k/include/asm/hardirq_no.h
diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h
index 56d0d5d..870e534 100644
--- a/arch/m68k/include/asm/hardirq.h
+++ b/arch/m68k/include/asm/hardirq.h
@@ -1,5 +1,34 @@
-#ifdef __uClinux__
-#include "hardirq_no.h"
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/cache.h>
+#include <asm/irq.h>
+
+#define HARDIRQ_BITS 8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#ifdef CONFIG_MMU
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
#else
-#include "hardirq_mm.h"
+
+#include <asm-generic/hardirq.h>
+
+#endif /* !CONFIG_MMU */
+
#endif
diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h
deleted file mode 100644
index 394ee94..0000000
--- a/arch/m68k/include/asm/hardirq_mm.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __M68K_HARDIRQ_H
-#define __M68K_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS 8
-
-#endif
diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h
deleted file mode 100644
index b44b14b..0000000
--- a/arch/m68k/include/asm/hardirq_no.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __M68K_HARDIRQ_H
-#define __M68K_HARDIRQ_H
-
-#include <asm/irq.h>
-
-#define HARDIRQ_BITS 8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-#include <asm-generic/hardirq.h>
-
-#endif /* __M68K_HARDIRQ_H */
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 907eff1..67c9738 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -33,15 +33,6 @@
#include <linux/spinlock_types.h>
/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-/*
* Interrupt source definitions
* General interrupt sources are the level 1-7.
* Adding an interrupt service routine for one of these sources
--
1.7.0.4
reply other threads:[~2011-05-06 0:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304641203-27994-1-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox