From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH] m68k: print memory layout info in boot log
Date: Fri, 21 Oct 2011 17:07:32 +1000 [thread overview]
Message-ID: <1319180852-11105-1-git-send-email-gerg@snapgear.com> (raw)
From: Greg Ungerer <gerg@uclinux.org>
Output a table of the kernel memory regions at boot time.
This is taken directly from the ARM architecture code that does this.
The table looks like this:
Virtual kernel memory layout:
vector : 0x00000000 - 0x00000400 ( 0 kB)
kmap : 0xd0000000 - 0xe0000000 ( 256 MB)
vmalloc : 0xc0000000 - 0xcfffffff ( 255 MB)
lowmem : 0x00000000 - 0x02000000 ( 32 MB)
.init : 0x00128000 - 0x00134000 ( 48 kB)
.text : 0x00020000 - 0x00118d54 ( 996 kB)
.data : 0x00118d60 - 0x00126000 ( 53 kB)
.bss : 0x00134000 - 0x001413e0 ( 53 kB)
This has been very useful while debugging the ColdFire virtual memory
support code. But in general I think it is nice to know extacly where
the kernel has layed everything out on boot.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/include/asm/traps.h | 1 +
arch/m68k/kernel/vmlinux-std.lds | 2 ++
arch/m68k/kernel/vmlinux-sun3.lds | 2 ++
arch/m68k/mm/init_mm.c | 34 ++++++++++++++++++++++++++++++++++
4 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h
index 151068f..4aff335 100644
--- a/arch/m68k/include/asm/traps.h
+++ b/arch/m68k/include/asm/traps.h
@@ -18,6 +18,7 @@
typedef void (*e_vector)(void);
extern e_vector vectors[];
+extern e_vector *_ramvec;
asmlinkage void auto_inthandler(void);
asmlinkage void user_inthandler(void);
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index d099359..63407c8 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -31,7 +31,9 @@ SECTIONS
RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
+ _sbss = .;
BSS_SECTION(0, 0, 0)
+ _ebss = .;
_edata = .; /* End of data section */
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 8080469..ad0f46d 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -44,7 +44,9 @@ __init_begin = .;
. = ALIGN(PAGE_SIZE);
__init_end = .;
+ _sbss = .;
BSS_SECTION(0, 0, 0)
+ _ebss = .;
_end = . ;
diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c
index bbe5254..beb383d 100644
--- a/arch/m68k/mm/init_mm.c
+++ b/arch/m68k/mm/init_mm.c
@@ -24,6 +24,7 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/system.h>
+#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/io.h>
#ifdef CONFIG_ATARI
@@ -75,6 +76,38 @@ extern void init_pointer_table(unsigned long ptable);
extern pmd_t *zero_pgtable;
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
+#define VECTORS &vectors[0]
+#else
+#define VECTORS _ramvec
+#endif
+
+void __init print_memmap(void)
+{
+#define UL(x) ((unsigned long) (x))
+#define MLK(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 10
+#define MLM(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 20
+#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), 1024)
+
+ printk(KERN_NOTICE "Virtual kernel memory layout:\n"
+ " vector : 0x%08lx - 0x%08lx (%4ld kB)\n"
+ " kmap : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " .init : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .text : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .data : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .bss : 0x%p" " - 0x%p" " (%4d kB)\n",
+ MLK(VECTORS, VECTORS + 256),
+ MLM(KMAP_START, KMAP_END),
+ MLM(VMALLOC_START, VMALLOC_END),
+ MLM(PAGE_OFFSET, (unsigned long)high_memory),
+ MLK_ROUNDUP(__init_begin, __init_end),
+ MLK_ROUNDUP(_stext, _etext),
+ MLK_ROUNDUP(_sdata, _edata),
+ MLK_ROUNDUP(_sbss, _ebss));
+}
+
void __init mem_init(void)
{
pg_data_t *pgdat;
@@ -125,6 +158,7 @@ void __init mem_init(void)
codepages << (PAGE_SHIFT-10),
datapages << (PAGE_SHIFT-10),
initpages << (PAGE_SHIFT-10));
+ print_memmap();
}
#ifdef CONFIG_BLK_DEV_INITRD
--
1.7.0.4
next reply other threads:[~2011-10-21 7:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-21 7:07 gerg [this message]
2011-10-21 14:56 ` [PATCH] m68k: print memory layout info in boot log Geert Uytterhoeven
2011-10-21 21:36 ` Greg Ungerer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319180852-11105-1-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox