Re: [PATCH 00/27 v7] m68k: Convert to genirq

Greg Ungerer
2011-10-31T01:29:54Z

Hi Geert,

On 30/10/11 22:48, Geert Uytterhoeven wrote:
> This patch series converts the m68k/mmu (nommu was converted before)
> architecture to the generic hardirq framework.
>
> - [01/27] ide-{cd,floppy,tape}: Do not include<linux/irq.h>
> - [02/27] m68k/irq: Rename irq_controller to irq_chip
> - [03/27] m68k/irq: Kill irq_node_t typedef, always use struct irq_node
> - [04/27] m68k/irq: Rename irq_node to irq_data
> - [05/27] m68k/irq: Switch irq_chip methods to "struct irq_data *data"
> - [06/27] m68k/irq: Rename setup_irq() to m68k_setup_irq() and make it static
> - [07/27] m68k/irq: Extract irq_set_chip()
> - [08/27] m68k/irq: Add m68k_setup_irq_controller()
> - [09/27] m68k/irq: Rename {,__}m68k_handle_int()
> - [10/27] m68k/irq: Remove obsolete IRQ_FLG_* users
> - [11/27] m68k/irq: Add genirq support
> - [12/27] m68k/atari: Convert Atari to genirq
> - [13/27] m68k/atari: Remove code and comments about different irq types
> - [14/27] m68k/amiga: Refactor amiints.c
> - [15/27] m68k/amiga: Convert Amiga to genirq
> - [16/27] m68k/amiga: Optimize interrupts using chain handlers
> - [17/27] m68k/mac: Convert Mac to genirq
> - [18/27] m68k/mac: Optimize interrupts using chain handlers
> - [19/27] m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq
> - [20/27] m68k/vme: Convert VME to genirq
> - [21/27] m68k/apollo: Convert Apollo to genirq
> - [22/27] m68k/sun3: Use the kstat_irqs_cpu() wrapper
> - [23/27] m68k/sun3: Convert Sun3/3x to genirq
> - [24/27] m68k/q40: Convert Q40/Q60 to genirq
> - [25/27] m68k/irq: Remove obsolete m68k irq framework
> - [26/27] m68k/irq: Remove obsolete support for user vector interrupt fixups
> - [27/27] m68k/mac: Remove mac_irq_{en,dis}able() wrappers
>
> Changes in v7:
> - Rebased after arch/m68k/Kconfig restructuring:
> - The temporary USE_GENERIC_HARDIRQS is now in arch/m68k/Kconfig,
> depending on MMU,
> - Rebased after arch/m68k/kernel/Makefile merge,
> - Split off IRQ_FLG_* removal in separate commits:
> - Postpone removals in drivers that should go through the respective
> driver trees (net/scsi/staging/serial),
> - Postpone final removal to v3.3,
> - Dropped (went in via another tree):
> - genirq: Add missing "else" in irq_shutdown(),
> - keyboard: Do not include<linux/irq.>,
> - Added Patch 27 ("m68k/mac: Remove mac_irq_{en,dis}able() wrappers")
>
> I added this to the m68k for-next and for-3.2 branches.
>
> I'll rebase it once more on top of v3.2-rc1 once that comes out (currently
> it's based on a random base point).

This all looks really good.

Acked-by: Greg Ungerer <gerg@uclinux.org>

Regards
Greg

------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com