From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH 03/35] m68k: definitions for the ColdFire V4e MMU hardware
Date: Fri, 16 Dec 2011 22:36:00 +1000 [thread overview]
Message-ID: <1324038992-31222-4-git-send-email-gerg@snapgear.com> (raw)
In-Reply-To: <1324038992-31222-1-git-send-email-gerg@snapgear.com>
From: Greg Ungerer <gerg@uclinux.org>
Basic register level definitions to support the internal MMU of the
V4e ColdFire cores.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Matt Waddel <mwaddel@yahoo.com>
Acked-by: Kurt Mahan <kmahan@xmission.com>
---
arch/m68k/include/asm/mcfmmu.h | 110 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 110 insertions(+), 0 deletions(-)
create mode 100644 arch/m68k/include/asm/mcfmmu.h
diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h
new file mode 100644
index 0000000..8fdcfed
--- /dev/null
+++ b/arch/m68k/include/asm/mcfmmu.h
@@ -0,0 +1,110 @@
+/*
+ * mcfmmu.h -- definitions for the ColdFire v4e MMU
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef MCFMMU_H
+#define MCFMMU_H
+
+/*
+ * The MMU support registers are mapped into the address space using
+ * the processor MMUBASE register. We used a fixed address for mapping,
+ * there doesn't seem any need to make this configurable yet.
+ */
+#define MMUBASE 0xfe000000
+
+/*
+ * The support registers of the MMU. Names are the sames as those
+ * used in the Freescale v4e documentation.
+ */
+#define MMUCR (MMUBASE + 0x00) /* Control register */
+#define MMUOR (MMUBASE + 0x04) /* Operation register */
+#define MMUSR (MMUBASE + 0x08) /* Status register */
+#define MMUAR (MMUBASE + 0x10) /* TLB Address register */
+#define MMUTR (MMUBASE + 0x14) /* TLB Tag register */
+#define MMUDR (MMUBASE + 0x18) /* TLB Data register */
+
+/*
+ * MMU Control register bit flags
+ */
+#define MMUCR_EN 0x00000001 /* Virtual mode enable */
+#define MMUCR_ASM 0x00000002 /* Address space mode */
+
+/*
+ * MMU Operation register.
+ */
+#define MMUOR_UAA 0x00000001 /* Update allocatiom address */
+#define MMUOR_ACC 0x00000002 /* TLB access */
+#define MMUOR_RD 0x00000004 /* TLB access read */
+#define MMUOR_WR 0x00000000 /* TLB access write */
+#define MMUOR_ADR 0x00000008 /* TLB address select */
+#define MMUOR_ITLB 0x00000010 /* ITLB operation */
+#define MMUOR_CAS 0x00000020 /* Clear non-locked ASID TLBs */
+#define MMUOR_CNL 0x00000040 /* Clear non-locked TLBs */
+#define MMUOR_CA 0x00000080 /* Clear all TLBs */
+#define MMUOR_STLB 0x00000100 /* Search TLBs */
+#define MMUOR_AAN 16 /* TLB allocation address */
+#define MMUOR_AAMASK 0xffff0000 /* AA mask */
+
+/*
+ * MMU Status register.
+ */
+#define MMUSR_HIT 0x00000002 /* Search TLB hit */
+#define MMUSR_WF 0x00000008 /* Write access fault */
+#define MMUSR_RF 0x00000010 /* Read access fault */
+#define MMUSR_SPF 0x00000020 /* Supervisor protect fault */
+
+/*
+ * MMU Read/Write Tag register.
+ */
+#define MMUTR_V 0x00000001 /* Valid */
+#define MMUTR_SG 0x00000002 /* Shared global */
+#define MMUTR_IDN 2 /* Address Space ID */
+#define MMUTR_IDMASK 0x000003fc /* ASID mask */
+#define MMUTR_VAN 10 /* Virtual Address */
+#define MMUTR_VAMASK 0xfffffc00 /* VA mask */
+
+/*
+ * MMU Read/Write Data register.
+ */
+#define MMUDR_LK 0x00000002 /* Lock entry */
+#define MMUDR_X 0x00000004 /* Execute access enable */
+#define MMUDR_W 0x00000008 /* Write access enable */
+#define MMUDR_R 0x00000010 /* Read access enable */
+#define MMUDR_SP 0x00000020 /* Supervisor access enable */
+#define MMUDR_CM_CWT 0x00000000 /* Cachable write thru */
+#define MMUDR_CM_CCB 0x00000040 /* Cachable copy back */
+#define MMUDR_CM_NCP 0x00000080 /* Non-cachable precise */
+#define MMUDR_CM_NCI 0x000000c0 /* Non-cachable imprecise */
+#define MMUDR_SZ_1MB 0x00000000 /* 1MB page size */
+#define MMUDR_SZ_4KB 0x00000100 /* 4kB page size */
+#define MMUDR_SZ_8KB 0x00000200 /* 8kB page size */
+#define MMUDR_SZ_1KB 0x00000300 /* 1kB page size */
+#define MMUDR_PAN 10 /* Physical address */
+#define MMUDR_PAMASK 0xfffffc00 /* PA mask */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Simple access functions for the MMU registers. Nothing fancy
+ * currently required, just simple 32bit access.
+ */
+static inline u32 mmu_read(u32 a)
+{
+ return *((volatile u32 *) a);
+}
+
+static inline void mmu_write(u32 a, u32 v)
+{
+ *((volatile u32 *) a) = v;
+ __asm__ __volatile__ ("nop");
+}
+
+#endif
+
+#endif /* MCFMMU_H */
--
1.7.0.4
next prev parent reply other threads:[~2011-12-16 12:36 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-16 12:35 [PATCH 00/35 v3] m68k: ColdFire MMU support gerg
2011-12-16 12:35 ` [PATCH 01/35] m68k: add machine and CPU definitions for ColdFire cores gerg
2011-12-16 12:35 ` [PATCH 02/35] m68k: show ColdFire CPU/FPU/MMU type gerg
2011-12-16 12:36 ` gerg [this message]
2011-12-16 12:36 ` [PATCH 04/35] m68k: make interrupt definitions conditional on correct CPU types gerg
2011-12-16 12:36 ` [PATCH 05/35] m68k: add TASK definitions for ColdFires running with MMU gerg
2011-12-16 12:36 ` [PATCH 06/35] m68k: modify user space access functions to support ColdFire CPUs gerg
2011-12-16 12:36 ` [PATCH 07/35] m68k: use addr_limit checking for m68k CPUs that do no support address spaces gerg
2011-12-16 12:36 ` [PATCH 08/35] m68k: init the MMU hardware for the 54xx ColdFire gerg
2011-12-16 12:36 ` [PATCH 09/35] m68k: add ColdFire 54xx CPU MMU memory init code gerg
2011-12-16 12:36 ` [PATCH 10/35] m68k: set register a2 to current if MMU enabled on ColdFire gerg
2011-12-16 12:36 ` [PATCH 11/35] m68k: page table support definitions and code for ColdFire MMU gerg
2011-12-16 12:36 ` [PATCH 12/35] m68k: add page table size definitions for ColdFire V4e MMU gerg
2011-12-16 12:36 ` [PATCH 13/35] m68k: add ColdFire paging exception handling code gerg
2011-12-16 12:36 ` [PATCH 14/35] m68k: add cache support for V4e ColdFire cores running with MMU enabled gerg
2011-12-16 12:36 ` [PATCH 15/35] m68k: modify ColdFire 54xx cache support for " gerg
2011-12-16 12:36 ` [PATCH 16/35] m68k: add TLB flush support for the ColdFire V4e MMU hardware gerg
2011-12-16 12:36 ` [PATCH 17/35] m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabled gerg
2011-12-16 12:36 ` [PATCH 18/35] m68k: set ColdFire MMU page size gerg
2011-12-16 12:36 ` [PATCH 19/35] m68k: MMU enabled ColdFire needs 8k ELF alignment gerg
2011-12-16 12:36 ` [PATCH 20/35] m68k: ColdFire V4e MMU context support code gerg
2011-12-16 12:36 ` [PATCH 21/35] m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace path gerg
2011-12-16 12:36 ` [PATCH 22/35] m68k: modify cache push and clear code for ColdFire with MMU enable gerg
2011-12-16 12:36 ` [PATCH 23/35] m68k: use ColdFire MMU read/write bit flags when ioremapping gerg
2011-12-16 12:36 ` [PATCH 24/35] m68k: ColdFire V4e MMU paging init code and miss handler gerg
2011-12-16 12:36 ` [PATCH 25/35] m68k: compile appropriate mm arch files for ColdFire MMU support gerg
2011-12-16 12:36 ` [PATCH 26/35] m68k: create ColdFire MMU pgalloc code gerg
2011-12-16 12:36 ` [PATCH 27/35] m68k: use non-MMU entry.S code when compiling for ColdFire CPU gerg
2011-12-16 12:36 ` [PATCH 28/35] m68k: add code to setup a ColdFire 54xx platform when MMU enabled gerg
2011-12-16 12:36 ` [PATCH 29/35] m68k: ColdFire with MMU enabled uses same clocking code as non-MMU gerg
2011-12-16 12:36 ` [PATCH 30/35] m68k: use non-MMU linker script for ColdFire MMU builds gerg
2011-12-16 12:36 ` [PATCH 31/35] m68k: adjustments to stack frame for ColdFire with MMU enabled gerg
2011-12-16 12:36 ` [PATCH 32/35] m68k: add ColdFire FPU support for the V4e ColdFire CPU's gerg
2011-12-16 12:36 ` [PATCH 33/35] m68k: do not use m68k startup or interrupt code for " gerg
2011-12-16 12:36 ` [PATCH 34/35] m68k: add ColdFire with MMU enabled support to the m68k mem init code gerg
2011-12-16 12:36 ` [PATCH 35/35] m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled gerg
-- strict thread matches above, loose matches on Subject: below --
2011-12-23 3:15 [PATCH 00/35 v4] m68k: ColdFire MMU support gerg
2011-12-23 3:15 ` [PATCH 03/35] m68k: definitions for the ColdFire V4e MMU hardware gerg
2011-11-25 3:40 [PATCH 00/35 v2] m68k: ColdFire MMU support gerg
2011-11-25 3:40 ` [PATCH 03/35] m68k: definitions for the ColdFire V4e MMU hardware gerg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324038992-31222-4-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox