From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH] m68knommu: clean up linker script
Date: Fri, 6 Jan 2012 14:49:27 +1000 [thread overview]
Message-ID: <1325825367-23758-1-git-send-email-gerg@snapgear.com> (raw)
From: Greg Ungerer <gerg@uclinux.org>
There is a lot of years of collected cruft in the m68knommu linker script.
Clean it all up and use the well defined linker script support macros.
Support is maintained for building both ROM/FLASH based and RAM based setups.
No major changes to section layouts, though the rodata section is now lumped
in with the read/write data section.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/kernel/vmlinux-nommu.lds | 200 +++++++++---------------------------
1 files changed, 49 insertions(+), 151 deletions(-)
diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds
index 8e66ccb..40e02d9 100644
--- a/arch/m68k/kernel/vmlinux-nommu.lds
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -1,195 +1,93 @@
/*
* vmlinux.lds.S -- master linker script for m68knommu arch
*
- * (C) Copyright 2002-2006, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2002-2012, Greg Ungerer <gerg@snapgear.com>
*
* This linker script is equipped to build either ROM loaded or RAM
* run kernels.
*/
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-#include <asm/thread_info.h>
-
#if defined(CONFIG_RAMKERNEL)
-#define RAM_START CONFIG_KERNELBASE
-#define RAM_LENGTH (CONFIG_RAMBASE + CONFIG_RAMSIZE - CONFIG_KERNELBASE)
-#define TEXT ram
-#define DATA ram
-#define INIT ram
-#define BSSS ram
-#endif
-#if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
-#define RAM_START CONFIG_RAMBASE
-#define RAM_LENGTH CONFIG_RAMSIZE
-#define ROMVEC_START CONFIG_ROMVEC
-#define ROMVEC_LENGTH CONFIG_ROMVECSIZE
-#define ROM_START CONFIG_ROMSTART
-#define ROM_LENGTH CONFIG_ROMSIZE
-#define TEXT rom
-#define DATA ram
-#define INIT ram
-#define BSSS ram
+#define KTEXT_ADDR CONFIG_KERNELBASE
#endif
-
-#ifndef DATA_ADDR
-#define DATA_ADDR
+#if defined(CONFIG_ROMKERNEL)
+#define KTEXT_ADDR CONFIG_ROMSTART
+#define KDATA_ADDR CONFIG_KERNELBASE
+#define LOAD_OFFSET KDATA_ADDR + (ADDR(.text) + SIZEOF(.text))
#endif
+#include <asm/page.h>
+#include <asm/thread_info.h>
+#include <asm-generic/vmlinux.lds.h>
OUTPUT_ARCH(m68k)
ENTRY(_start)
-MEMORY {
- ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
-#ifdef ROM_START
- romvec : ORIGIN = ROMVEC_START, LENGTH = ROMVEC_LENGTH
- rom : ORIGIN = ROM_START, LENGTH = ROM_LENGTH
-#endif
-}
-
jiffies = jiffies_64 + 4;
SECTIONS {
-#ifdef ROMVEC_START
- . = ROMVEC_START ;
+#ifdef CONFIG_ROMVEC
+ . = CONFIG_ROMVEC;
.romvec : {
- __rom_start = . ;
+ __rom_start = .;
_romvec = .;
+ *(.romvec)
*(.data..initvect)
- } > romvec
+ }
#endif
+ . = KTEXT_ADDR;
+
+ _text = .;
+ _stext = .;
.text : {
- _text = .;
- _stext = . ;
HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
- *(.text..lock)
*(.fixup)
+ . = ALIGN(16);
+ }
+ _etext = .;
+
+#ifdef KDATA_ADDR
+ . = KDATA_ADDR;
+#endif
+
+ _sdata = .;
+ RO_DATA_SECTION(PAGE_SIZE)
+ RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
-
- *(.rodata) *(.rodata.*)
- *(__vermagic) /* Kernel version magic */
- *(.rodata1)
- *(.rodata.str1.1)
-
- /* Kernel symbol table: Normal symbols */
- . = ALIGN(4);
- __start___ksymtab = .;
- *(SORT(___ksymtab+*))
- __stop___ksymtab = .;
-
- /* Kernel symbol table: GPL-only symbols */
- __start___ksymtab_gpl = .;
- *(SORT(___ksymtab_gpl+*))
- __stop___ksymtab_gpl = .;
-
- /* Kernel symbol table: Normal unused symbols */
- __start___ksymtab_unused = .;
- *(SORT(___ksymtab_unused+*))
- __stop___ksymtab_unused = .;
-
- /* Kernel symbol table: GPL-only unused symbols */
- __start___ksymtab_unused_gpl = .;
- *(SORT(___ksymtab_unused_gpl+*))
- __stop___ksymtab_unused_gpl = .;
-
- /* Kernel symbol table: GPL-future symbols */
- __start___ksymtab_gpl_future = .;
- *(SORT(___ksymtab_gpl_future+*))
- __stop___ksymtab_gpl_future = .;
-
- /* Kernel symbol table: Normal symbols */
- __start___kcrctab = .;
- *(SORT(___kcrctab+*))
- __stop___kcrctab = .;
-
- /* Kernel symbol table: GPL-only symbols */
- __start___kcrctab_gpl = .;
- *(SORT(___kcrctab_gpl+*))
- __stop___kcrctab_gpl = .;
-
- /* Kernel symbol table: Normal unused symbols */
- __start___kcrctab_unused = .;
- *(SORT(___kcrctab_unused+*))
- __stop___kcrctab_unused = .;
-
- /* Kernel symbol table: GPL-only unused symbols */
- __start___kcrctab_unused_gpl = .;
- *(SORT(___kcrctab_unused_gpl+*))
- __stop___kcrctab_unused_gpl = .;
-
- /* Kernel symbol table: GPL-future symbols */
- __start___kcrctab_gpl_future = .;
- *(SORT(___kcrctab_gpl_future+*))
- __stop___kcrctab_gpl_future = .;
-
- /* Kernel symbol table: strings */
- *(__ksymtab_strings)
-
- /* Built-in module parameters */
- . = ALIGN(4) ;
- __start___param = .;
- *(__param)
- __stop___param = .;
-
- /* Built-in module versions */
- . = ALIGN(4) ;
- __start___modver = .;
- *(__modver)
- __stop___modver = .;
-
- . = ALIGN(4) ;
- _etext = . ;
- } > TEXT
-
- .data DATA_ADDR : {
- . = ALIGN(4);
- _sdata = . ;
- DATA_DATA
- CACHELINE_ALIGNED_DATA(32)
- PAGE_ALIGNED_DATA(PAGE_SIZE)
- *(.data..shared_aligned)
- INIT_TASK_DATA(THREAD_SIZE)
- _edata = . ;
- } > DATA
+ EXCEPTION_TABLE(16)
+ NOTES
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
+ PERCPU_SECTION(16)
.m68k_fixup : {
__start_fixup = .;
*(.m68k_fixup)
__stop_fixup = .;
- } > DATA
- NOTES > DATA
-
- .init.text : {
- . = ALIGN(PAGE_SIZE);
- __init_begin = .;
- } > INIT
- INIT_TEXT_SECTION(PAGE_SIZE) > INIT
- INIT_DATA_SECTION(16) > INIT
+ }
.init.data : {
. = ALIGN(PAGE_SIZE);
__init_end = .;
- } > INIT
-
- .bss : {
- . = ALIGN(4);
- _sbss = . ;
- *(.bss)
- *(COMMON)
- . = ALIGN(4) ;
- _ebss = . ;
- _end = . ;
- } > BSSS
+ }
+
+ _sbss = .;
+ BSS_SECTION(0, 0, 0)
+ _ebss = .;
+
+ _end = .;
+
+ STABS_DEBUG
+ .comment 0 : { *(.comment) }
+ /* Sections to be discarded */
DISCARDS
}
--
1.7.0.4
reply other threads:[~2012-01-06 4:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1325825367-23758-1-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox