From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH 6/7] m68knommu: make 532x FEC platform addressing consistent
Date: Fri, 24 Feb 2012 14:24:10 +1000 [thread overview]
Message-ID: <1330057451-28481-7-git-send-email-gerg@snapgear.com> (raw)
In-Reply-To: <1330057451-28481-1-git-send-email-gerg@snapgear.com>
From: Greg Ungerer <gerg@uclinux.org>
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.
So modify the ColdFire 532x FEC addressing so that:
. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/include/asm/m532xsim.h | 13 +++++++++++++
arch/m68k/platform/532x/config.c | 16 ++++++++--------
2 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index f963d64..f1c4fa8 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -24,11 +24,18 @@
#define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
+#define MCFINT_FECRX0 36 /* Interrupt number for FEC */
+#define MCFINT_FECTX0 40 /* Interrupt number for FEC */
+#define MCFINT_FECENTC0 42 /* Interrupt number for FEC */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
+#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
+#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
+#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
+
#define MCF_WTM_WCR MCF_REG16(0xFC098000)
/*
@@ -91,6 +98,12 @@
#define MCFUART_BASE2 0xFC068000 /* Base address of UART3 */
/*
+ * FEC module.
+ */
+#define MCFFEC_BASE0 0xFC030000 /* Base address of FEC0 */
+#define MCFFEC_SIZE0 0x800 /* Size of FEC0 region */
+
+/*
* Timer module.
*/
#define MCFTIMER_BASE1 0xFC070000 /* Base address of TIMER1 */
diff --git a/arch/m68k/platform/532x/config.c b/arch/m68k/platform/532x/config.c
index 32f8b82..69e2bc0 100644
--- a/arch/m68k/platform/532x/config.c
+++ b/arch/m68k/platform/532x/config.c
@@ -35,23 +35,23 @@
static struct resource m532x_fec_resources[] = {
{
- .start = 0xfc030000,
- .end = 0xfc0307ff,
+ .start = MCFFEC_BASE0,
+ .end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
.flags = IORESOURCE_MEM,
},
{
- .start = 64 + 36,
- .end = 64 + 36,
+ .start = MCF_IRQ_FECRX0,
+ .end = MCF_IRQ_FECRX0,
.flags = IORESOURCE_IRQ,
},
{
- .start = 64 + 40,
- .end = 64 + 40,
+ .start = MCF_IRQ_FECTX0,
+ .end = MCF_IRQ_FECTX0,
.flags = IORESOURCE_IRQ,
},
{
- .start = 64 + 42,
- .end = 64 + 42,
+ .start = MCF_IRQ_FECENTC0,
+ .end = MCF_IRQ_FECENTC0,
.flags = IORESOURCE_IRQ,
},
};
--
1.7.0.4
next prev parent reply other threads:[~2012-02-24 4:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-24 4:24 [PATCH 0/7] m68knommu: clean up and merge common ColdFire FEC code gerg
2012-02-24 4:24 ` [PATCH 1/7] m68knommu: make 520x FEC platform addressing consistent gerg
2012-02-24 4:24 ` [PATCH 2/7] m68knommu: make 523x " gerg
2012-02-24 4:24 ` [PATCH 3/7] m68knommu: make 5272 " gerg
2012-02-24 4:24 ` [PATCH 4/7] m68knommu: make 527x " gerg
2012-02-24 4:24 ` [PATCH 5/7] m68knommu: make 528x " gerg
2012-02-24 4:24 ` gerg [this message]
2012-02-24 4:24 ` [PATCH 7/7] m68knommu: merge common ColdFire FEC platform setup code gerg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330057451-28481-7-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox