From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH 3/7] m68knommu: make 5249 QSPI platform addressing consistent
Date: Fri, 24 Feb 2012 15:06:51 +1000 [thread overview]
Message-ID: <1330060015-10877-4-git-send-email-gerg@snapgear.com> (raw)
In-Reply-To: <1330060015-10877-1-git-send-email-gerg@snapgear.com>
From: Greg Ungerer <gerg@uclinux.org>
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.
So modify the ColdFire 5249 QSPI addressing so that:
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/include/asm/m5249sim.h | 11 +++++++++++
arch/m68k/include/asm/mcfqspi.h | 2 --
arch/m68k/platform/5249/config.c | 9 ++-------
3 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 3e31508..7f0c2c3 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -80,6 +80,17 @@
#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
/*
+ * QSPI module.
+ */
+#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */
+#define MCFQSPI_SIZE 0x40 /* Register set size */
+
+#define MCFQSPI_CS0 29
+#define MCFQSPI_CS1 24
+#define MCFQSPI_CS2 21
+#define MCFQSPI_CS3 22
+
+/*
* DMA unit base addresses.
*/
#define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */
diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h
index 62148b7..e9a7e1a 100644
--- a/arch/m68k/include/asm/mcfqspi.h
+++ b/arch/m68k/include/asm/mcfqspi.h
@@ -23,8 +23,6 @@
#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
-#elif defined(CONFIG_M5249)
-#define MCFQSPI_IOBASE (MCF_MBAR + 0x300)
#elif defined(CONFIG_M532x)
#define MCFQSPI_IOBASE 0xFC058000
#endif
diff --git a/arch/m68k/platform/5249/config.c b/arch/m68k/platform/5249/config.c
index 3871251..b7feb92 100644
--- a/arch/m68k/platform/5249/config.c
+++ b/arch/m68k/platform/5249/config.c
@@ -48,8 +48,8 @@ static struct platform_device m5249_smc91x = {
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m5249_qspi_resources[] = {
{
- .start = MCFQSPI_IOBASE,
- .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+ .start = MCFQSPI_BASE,
+ .end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
@@ -59,11 +59,6 @@ static struct resource m5249_qspi_resources[] = {
},
};
-#define MCFQSPI_CS0 29
-#define MCFQSPI_CS1 24
-#define MCFQSPI_CS2 21
-#define MCFQSPI_CS3 22
-
static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
--
1.7.0.4
next prev parent reply other threads:[~2012-02-24 5:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-24 5:06 [PATCH 0/7] m68knommu: clean up and merge common ColdFire QSPI code gerg
2012-02-24 5:06 ` [PATCH 1/7] m68knommu: make 520x QSPI platform addressing consistent gerg
2012-02-24 5:06 ` [PATCH 2/7] m68knommu: make 523x " gerg
2012-02-24 5:06 ` gerg [this message]
2012-02-24 5:06 ` [PATCH 4/7] m68knommu: make 527x " gerg
2012-02-24 5:06 ` [PATCH 5/7] m68knommu: make 528x " gerg
2012-02-24 5:06 ` [PATCH 6/7] m68knommu: make 532x " gerg
2012-02-24 5:06 ` [PATCH 7/7] m68knommu: merge common ColdFire QSPI platform setup code gerg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330060015-10877-4-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox