From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH 2/4] m68knommu: make ColdFire M532x platform support more v3 generic
Date: Mon, 19 Nov 2012 15:14:06 +1000 [thread overview]
Message-ID: <1353302048-924-3-git-send-email-gerg@snapgear.com> (raw)
In-Reply-To: <1353302048-924-1-git-send-email-gerg@snapgear.com>
From: Greg Ungerer <gerg@uclinux.org>
The M532x CPU platform support can be used on more ColdFire CPU families
than just the 532x types. So rename and reconfigure it to reflect that.
The ColdFire 537x family has virtualy identical internals to the 532x,
and so it will be able to share this code when we add support for them.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/platform/coldfire/Makefile | 2 +-
arch/m68k/platform/coldfire/{m532x.c => m53xx.c} | 18 +++++++++---------
2 files changed, 10 insertions(+), 10 deletions(-)
rename arch/m68k/platform/coldfire/{m532x.c => m53xx.c} (98%)
diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile
index 02591a1..68f0fac 100644
--- a/arch/m68k/platform/coldfire/Makefile
+++ b/arch/m68k/platform/coldfire/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
-obj-$(CONFIG_M532x) += m532x.o timers.o intc-simr.o reset.o
+obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o
obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m53xx.c
similarity index 98%
rename from arch/m68k/platform/coldfire/m532x.c
rename to arch/m68k/platform/coldfire/m53xx.c
index 7951d1d..638382e 100644
--- a/arch/m68k/platform/coldfire/m532x.c
+++ b/arch/m68k/platform/coldfire/m53xx.c
@@ -1,7 +1,7 @@
/***************************************************************************/
/*
- * linux/arch/m68knommu/platform/532x/config.c
+ * m53xx.c -- platform support for ColdFire 53xx based boards
*
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2000, Lineo (www.lineo.com)
@@ -153,7 +153,7 @@ static struct clk * const disable_clks[] __initconst = {
};
-static void __init m532x_clk_init(void)
+static void __init m53xx_clk_init(void)
{
unsigned i;
@@ -169,7 +169,7 @@ static void __init m532x_clk_init(void)
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-static void __init m532x_qspi_init(void)
+static void __init m53xx_qspi_init(void)
{
/* setup QSPS pins for QSPI with gpio CS control */
writew(0x01f0, MCFGPIO_PAR_QSPI);
@@ -179,7 +179,7 @@ static void __init m532x_qspi_init(void)
/***************************************************************************/
-static void __init m532x_uarts_init(void)
+static void __init m53xx_uarts_init(void)
{
/* UART GPIO initialization */
writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART);
@@ -187,7 +187,7 @@ static void __init m532x_uarts_init(void)
/***************************************************************************/
-static void __init m532x_fec_init(void)
+static void __init m53xx_fec_init(void)
{
u8 v;
@@ -217,11 +217,11 @@ void __init config_BSP(char *commandp, int size)
}
#endif
mach_sched_init = hw_timer_init;
- m532x_clk_init();
- m532x_uarts_init();
- m532x_fec_init();
+ m53xx_clk_init();
+ m53xx_uarts_init();
+ m53xx_fec_init();
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
- m532x_qspi_init();
+ m53xx_qspi_init();
#endif
#ifdef CONFIG_BDM_DISABLE
--
1.7.0.4
next prev parent reply other threads:[~2012-11-19 5:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-19 5:14 [PATCH 0/4] m68knommu: add support for ColdFire 5373 CPU family gerg
2012-11-19 5:14 ` [PATCH 1/4] m68knommu: create and use a common M53xx ColdFire class of CPUs gerg
2012-11-19 5:14 ` gerg [this message]
2012-11-19 5:14 ` [PATCH 3/4] m68knommu: add support for the ColdFire 537x family " gerg
2012-11-19 5:14 ` [PATCH 4/4] m68knommu: add support for configuring a Freescale M5373EVB board gerg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353302048-924-3-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox